Instruction Manual

3
• Disconnect the power plug
before dismantling, assembling
or before cleaning and when
the air circulator is not in use.
• Avoid touching moving parts
of the air circulator.
• Never insert fingers, pencils or
any other objects through the
guards whenever the power
plug is connected, in particular
while the air circulator is
switched on.
• The air circulator must not
be used if the guards are not
fastened correctly, according
to instructions provided in
this book.
• When positioning the rear
grille on the motor shaft, always
ensure the carry handle on
the grille is positioned in the
upright position.
• Ensure the fan blade engages
fully onto the shaft. Please note
this may require some force to
ensure it is fully engaged.
• The air circulator must not
be used if the base is not
fastened correctly, according
to the instructions provided in
this book.
• Do not operate in the presence
of explosives and/or flammable
fumes or liquids.
• Do not unplug the air circulator
by pulling on the cord.
• Never carry the air circulator by
the cord or yank to disconnect
from an outlet; instead, grasp
the plug and pull to disconnect.
Do not pull the cord around
sharp edges or corners.
• Allow the fan blade to stop
completely, always switch off
at the power outlet, and then
unplug the air circulator from
the outlet:
− Before attempting to move
the air circulator
− Before cleaning and
maintenance unless
otherwise specified in
this booklet
− Immediately after use.
• To prevent damage to the air
circulator do not use alkaline
cleaning agents when cleaning,
uses a soft cloth and mild
detergent.
• Do not place anything, on
top of the air circulator when
assembled, when in use and
when stored.
• Store the unit out of reach
of children.
• Keep the air circulator
clean. Follow the cleaning
instructions provided in
this book.