the AirRounder TM Connect Instruction Book - LPH408
SPECIFICATIONS Contents 2 Breville Recommends Safety First 8 Components 8 Remote Control Panel 9 Control Panel 9 Display Screen 10 Features 11 Assembly 12 Functions 17 Wi-Fi Connectivity & Voice Assistants 20 Care, Cleaning & Storage 21 Replacing the Filter 22 Troubleshooting BREVILLE RECOMMENDS SAFETY FIRST At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind.
• To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this purifier fan heater. • Avoid touching the purifier fan heater body while it is on as some parts of the purifier fan heater are hot. When moving the purifier fan heater, switch OFF and let the purifier fan heater cool down before attempting to move it. • When moving the purifier fan heater, always carry the purifier fan heater by the base.
• Do not operate the purifier fan heater with a damaged cord or plug, or if the purifier fan heater has been dropped or damaged in any matter, return the purifier fan heater to your nearest Breville service centre for examination, electrical or mechanical adjustment or repair. • Do not operate the purifier fan heater with the power cord damaged, frayed or split, wound around any part of the purifier fan heater, or in contact with heated surfaces of the heater.
Allow the purifier fan heater to cool down before cleaning or storing. • Do not operate the purifier fan heater on a sink or drain board. • To avoid an electrical overload, it is recommended that no other appliances are plugged into the same circuit as your purifier fan heater when it is in use. • Do not move the purifier fan heater when it is switched on. • Do not use outdoors. This purifier fan heater is not intended for commercial use such as construction sites.
• To protect against electric shock, do not immerse the power cord, power plug or appliance in water or any other liquid or allow moisture to come in contact with the part, unless it is recommended in the cleaning instructions.
• Always turn the appliance to the OFF position, switch off at the power outlet and unplug at the power outlet when the appliance is not in use. • Before cleaning, always turn the appliance to the OFF position, switch off at the power outlet, unplug at the power outlet and remove the power cord, if detachable, from the appliance and allow all parts to cool. • Do not place this appliance on or near a heat source, such as hot plate, oven or heaters.
Components F G H A B C D A E A. B. C. D. E. F. G. H. Front Grille LED Display Control Panel Front Vent (air inlet) Oscillating Base Remote Control 3- Layer Filter Removable Back Vent (rear cover) NOT PICTURED • Power Cord and Plug • Remote Control Storage • Non-Slip/Non-Marking Rubber Feet 8 B D C E REMOTE CONTROL PANEL A. B. C. D. Power ON/OFF & Wi-Fi button Oscillation 60°C, 120°C & 180°C Timer (up to 7 hours) button Heating LOW/HIGH, Temp Increase & Set Temp button E.
Control Panel A OUTER CONTROL PANEL A. Power ON/OFF & Wi-Fi button B. Timer (up to 7 hours) button C. Oscillation 60°C, 120°C, 180°C & Filter Reset button D. Cooling LOW/MEDIUM/ HIGH, temp decrease & Child Lock button E. Heating LOW/HIGH, temp increase & Set Temp button E D DISPLAY SCREEN A. Wi-Fi B. Timer (up to 7 hours) C. Oscillation 60°C, 120°C, 180°C D. Cooling LOW/ MEDIUM/HIGH E. Heating LOW/HIGH F. Child Lock G. Ambient / Set Temperature Display H.
Features WHAT IS THE AIRROUNDER™ CONNECT PURIFIER FAN HEATER? The Breville AirRounder™ Connect purifier fan heater features an air purifier, heater and cooling fan in one. The Purifier improves your indoor air quality using 3 distinct levels of protection. 1. A Pre-Filter Captures larger airborne particles such as human hair, pet dander and dust particles. 2. A True HEPA Filter Traps up to 99.97% of fine particles, allergens and airborne contaminants down to 0.3 microns in size.
Assembly BEFORE FIRST USE • Remove and safely discard any packaging material or promotional labels attached to your purifier fan heater and filter. Check for any missing or damaged parts as per the components list. • Remove the filter from the purifier fan heater (see REPLACING THE FILTER on page 19) and take it out of the plastic bag. Then reinsert the filter into the purifier fan heater.
Functions OPERATING YOUR PURIFIER FAN HEATER NOTE The purifier automatically operates when either Heating or Cooling is turned on. It is recommended to use the Low Fan setting to purify the surrounding area when a room temperature adjustment is not required. Place the purifier fan heater on a flat surface. Insert the power plug into a 230V or 240V power outlet and switch on at the outlet. When switched on, a chime will sound to confirm the unit is switched on and it is in standby mode. 1.
2. To cancel a cooling setting, press the button to stop operation. If the operation is stopped, the unit will enter standby mode and the LED display screen will be dimmed and display the ambient room temperature. Heating + Purifying Mode Your purifier fan heater has 2 heat settings LOW and HIGH and allows you to set your desired temperature with the default temperature setting at 25°C. 1.
Night Mode Your purifier fan heater is fitted with a lightsensitive sensor that will intelligently stop the LED display screen from illuminating at night when in a dark place. The Night mode will automatically turn off all lights on the LED display panel and operate in the last setting. Press any button on the control panel or remote control to re-engage the LED display panel. TIMER AUTO-OFF TIMER The purifier fan heater comes with a 7-hour auto-off timer to turn off after a set number of hours.
CHILD LOCK When the Child Lock is engaged, the buttons on the control panel are locked from use. button 1. To turn on, press and hold the on the control panel or press and hold the on the remote control until a beep sounds and the child lock icon illuminates on the LED display panel. 2. To cancel, repeat step 1 until the child lock icon no longer illuminates on the LED display panel.
Reinsert the battery compartment into the remote control ensuring that the + symbol is facing downwards when inserted. Make sure the battery compartment is correctly secured (Fig 3). 360° Fig. 3 NOTE To use the remote control, it must be pointed at the control panel and must be used within five meters of the unit 16 WARNING KEEP BATTERIES OUT OF REACH OF CHILDREN Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the oesophagus.
Wi-Fi Connectivity The Breville AirRounder™ Connect purifier fan heater can offer remote operation by using a home Wi-Fi connection and the Breville Home Connect™ app downloaded to a compatible mobile phone. through the Google Play store or Apple App store. To go straight to the appropriate app store, scan the QR code below. For instructions on how to use the app, scan the QR code below, refer to the Quick Start Guide that can be found in the box or go to tinyurl.com/HomeConnectQuickStart.
Voice Assistants The Breville AirRounder™ Connect purifier fan heater comes with the added feature of voice assistance, allowing you to control your purifier fan heater using your voice by linking your Breville Home Connect™ app with Amazon Alexa and Google Home/Assistant. To link your Breville Home Connect™ app account with either Amazon Alexa or Google Home/ Assistant, refer to the instructions on www.Breville.
Before you can voice control your Breville AirRounder™ Connect with Google Home/Assistant, you need to link the Breville Home Connect™ account to the Google Home/Assistant app as per the instructions.
Care, Cleaning & Storage The purifier fan heater and filter should be cleaned at least once every month. Ensure the purifier fan heater is switched off and disconnected from the power outlet and allow all parts to cool before cleaning or storing. • Use a clean, dry cloth to clean all external surfaces of the purifier fan heater. FILTER CARE & CLEANING WARNING The filter is not washable. Do not immerse any part of the air purifier in water as it will cause damage.
REPLACING THE FILTER Your AirRounder™ Connect purifier fan heater filter should be replaced in the time frames indicated below. The filter life is approximately 3 months if used 24 hours daily, or 6 months if used 12 hours daily. • The filter life may vary to this timing depending on environmental conditions. • Remove all packaging from the replacement filter and place the filter into the unit as described below. 1. Remove the rear housing cover (Fig 5). 3.
REPLACEMENT FILTERS Replacement filters must be purchased from the Breville website^ or at participating retail outlets. See the table below for the replacement product code to suit this Breville Purifier Fan Heater. Breville Purifier Fan Heater Model No. Filter Replacement Product Code the AirRounder™ Connect LPH408WHT LPH040WHT the AirRounder Plus™ Connect LPH708WHT LPH070WHT ^Delivery charges may apply. Please contact Breville Customer Service Centre for further support.
Troubleshooting MINI TROUBLESHOOTING GUIDE Before carrying out any of the following service checks, unplug the unit from the mains. PROBLEM Unit will not start Insufficient air flow Excessive noise Not heating in the heating mode WHAT TO DO • Check that the power plug is connected to a power outlet and the outlet is turned on. • Check that purifier fan heater is assembled correctly. • Check that the filter is fitted correctly in place. • Make sure the filter is removed from the packaging.
BREVILLE HOME CONNECT™ APP TROUBLESHOOTING PROBLEM Why can’t I connect my purifier fan heater to Wi-Fi network? How do I change my Wi-Fi network to a 2.4GHz Wi-Fi network? WHAT TO DO • Check that your purifier is within range of the Wi-Fi router • During the setup process you must be on a secure 2.4GHz Wi-Fi network. • Make sure the Wi-Fi password you entered is correct. • Check that the filter is fitted correctly in place. • Unplug the purifier for 10 seconds and plug it back in.
TROUBLESHOOTING GUIDE FOR AMAZON ALEXA AND GOOGLE HOME/ASSISTANT PROBLEM Why is Amazon Alexa or Google Home/Assistant not responding to my voice commands. WHAT TO DO • Check the internet connection. • Restart your device & mobile phone. • Restart your modem and router. • Make sure your Amazon Alexa or Google-enabled device or mobile phone is in Wi-Fi range.
Note 26
Note 27
Breville Customer Service Centre Australian Customers New Zealand Customers Phone: 1300 139 798 Phone: 0800 273 845 Web: Web: www.breville.com www.breville.com Breville, the Breville logo, Master Every Moment, AirRounder, ThermoSecure and Breville Home Connect are trademarks of Breville Pty. Ltd. A.B.N. 98 000 092 928. Copyright Breville Pty. Ltd. 2021 All other brands may be trademarks of their respective owners.
