User's Manual

23
Troubleshooting
MINI TROUBLESHOOTING GUIDE
Before carrying out any of the following service checks, unplug the unit from the mains.
PROBLEM WHAT TO DO
Unit will not start
•
Check that the power plug is connected to a power outlet and the
outlet is turned on.
•
Check that purifier fan heater is assembled correctly.
•
Check that the filter is fitted correctly in place.
Insufficient air flow
•
Make sure the filter is removed from the packaging.
•
Check that the filters are clean.
•
Check for any obstructions in the air inlet and/or outlet.
Excessive noise
•
Check if the filter is clogged and ready for replacement.
•
Check that the rear housing cover is closed properly.
•
Check that the unit is on a level surface
Not heating in the heating mode
•
Check for any obstructions in the air inlet and/or outlet.
•
Surface temperature of the heating plate rises, and the thermostat
has stopped working.
Filter Indicator is still illuminated
after replacing the air filter
•
Reset the REPLACE FILTER indicator (see page 19).
Breville Customer Service Centre (see back cover for contact details)