product safety READ CAREFULLY AND KEEP FOR FUTURE REFERENCE This product can be used by children aged 8 years and above, and persons who require supervision, provided: • they are familiar with the hazards associated with the product, and, • they receive instruction by a competent person on how to safely use the product. Children must not play with the product. Cleaning and user maintenance must not be done by children unless they are supervised.
features q werty u i o j a h gf ds 1. Water tank inlet cover 9. Heel rest 2. Steam control 10. Cord wrap 3. Shot of steam button 11. Ceramic soleplate 4. Spray button 12. Self-clean button 5. Temperature indicator light 13. Water level maximum indicator 6. Temperature selector 14. Pointer 7. Power indicator light 15. Water tank 8. Flexible cord protector 16.
before first use Remove all packaging including any soleplate protection before using your iron. General Wipe over the soleplate with a cloth moistened with methylated spirit. Wipe off the methylated spirit with a damp cloth then dry the soleplate thoroughly. Before connecting your iron to the mains supply, make sure your supply voltage is the same as the one indicated on your iron. When you first use your iron, there may be a slight odour and it may smoke slightly for the first few minutes of operation.
filling your iron Never add fabric conditioner, starches or any other chemicals to the water in your iron. 1. Ensure your iron is switched off and unplugged from the mains supply socket. 2. Set the steam control to the no steam position (0). 3. Open the water tank inlet cover. 4. Fill the water tank with ordinary tap water. To avoid air locks, tilt your iron slightly while filling it. 5. Don’t fill the iron above the water level indicator MAX marking. Check the water level by standing the iron on its heel.
using your iron We recommend that you: • Start by ironing those items of laundry that require the lowest temperature (e.g. synthetics). Finish by ironing fabrics which respond best to higher temperatures and steam—such as cotton and linen. • If you iron a fabric made of a blend of fibres set the temperature of your iron to the most delicate fibre. • Never use the burst of steam button on silks or synthetics.
using your iron Ironing without steam If you intend to dry-iron fabrics there is no need to fill the water tank. However, if water is already in the water tank, you don’t need to empty it. 1. Set the steam control to the no steam position (0). 2. Plug your iron into the mains supply and switch on. 3. Rotate the temperature control dial until the desired setting is aligned with the dial pointer. 4. When the temperature indicator light comes on, your iron is ready to use.
using your iron Vertical steam ironing Never iron garments when they are being worn. Your iron can be used for vertical steam ironing curtains, dresses on hangers etc. 1. Fill your iron with water. 2. Plug your iron into the mains supply and switch on. 3. Set the temperature control dial to the lll setting. The hotter your iron, the more steam is generated. 4. When the temperature indicator light comes on, your iron is ready to use. 5. Hold your iron 15cm (6 inches) from the fabric. 6.
care and cleaning Do not use harsh abrasives, chemical cleaners or solvents to clean the exterior of your iron because they will damage the surface. Cleaning the soleplate of your Iron After each use, allow your iron to completely cool down before wiping the soleplate with a soft damp cloth. If polyester has burnt to the soleplate, iron a damp cotton cloth while your iron is still hot.
care and cleaning Cleaning the steam holes To remove any build-up in or around the steam holes which may affect steam performance, use a cotton wool tip moistened with methylated spirits. Wipe off the methylated spirits with a damp cloth then dry the soleplate. Cleaning the exterior of your Iron To clean the exterior of your iron, wipe it with a soft damp cloth and wipe dry.
storing Storing your iron • Set the steam control to the no steam position (0). • Switch the mains supply socket off and remove the plug. • When the soleplate has cooled, empty the remaining water from the tank. • Always store your iron on its heel rest. Do not store your iron resting on its soleplate, or in the carton. • Do not wrap the power cord around the soleplate. The cord can be neatly wrapped around the heel of your iron.
connection to the mains supply This appliance must be earthed. This appliance is fitted with either a moulded or rewirable BS1363, 13 amp plug. The fuse should be rated at 13 amps and be ASTA approved to BS1362. If the fuse in a moulded plug needs to be changed, the fuse cover must be refitted. The appliance must not be used without the fuse cover fitted. If the plug is unsuitable, it should be dismantled and removed from the supply cord and an appropriate plug fitted as detailed below.
after sales service These appliances are built to the very highest of standards. There are no user serviceable parts. Follow these steps if the unit fails to operate: 1. Check the instructions have been followed correctly. 2. Check that the fuse has not blown. 3. Check that the mains supply is functional. If the appliance will still not operate, return the appliance to the place it was purchased for a replacement. To return the appliance to the Customer Service Department, follow the steps below: 1.
guarantee Please keep your receipt as this will be required for any claims under this guarantee. This appliance is guaranteed for 1 year after your purchase as described in this document. During this guaranteed period, if in the unlikely event the appliance no longer functions due to a design or manufacturing fault, please take it back to the place of purchase, with your till receipt and a copy of this guarantee.
VIN224_Iss_2 10/13 93265-1