User`s manual

< Hardware Reset >

The Reset Button can be used to reboot the camera or restore it to factory default

settings. If the camera experiences a problem, rebooting the camera may correct the

problem. If the problem remains, please restore the camera to factory default settings

and reinstall the software.

To Reboot

Press and hold the Reset Button for one second using a paper clip or thin object. Wait

for the camera to reboot.

To Restore

Press and hold the Reset Button for ten seconds until the LED light turns off. When

successful restored, the LED will be blue during normal operation.

NOTE - By restoring the camera, all settings will be restored to the factory

default settings.

Reset Button