User Manual

Chapter 4: Server functions 30
Resetting the server
The Reset server menu function resets the entire server and deletes all entered data. To avoid
accidental resets, you will be asked to enter a verification number which is displayed on the screen.
Note: If the server is not connected to the power adapter and/or is not fitted with batteries, all data will
be lost. It is therefore not necessary to reset the server before disconnecting it from the power source
or after connecting it to the power source.
Setting the region
The Bridgemate Pro score system communicates over a predetermined frequency spectrum. The
permitted frequency differs per continent. Three continents are currently supported: Europe, North
America and Australia / New Zealand. When first launching Bridgemate Pro Control, you will be asked
to select your region. The server will select the corresponding frequency spectrum to communicate
with the Bridgemates. Remember to use the correct Bridgemate firmware for your region. For Europe,
all firmware versions with a European country code can be used (NL, FR, DE, EN, ES, PT, IT, DK,
NO, SE). For North America, firmware version with country code US can be used. For Australia and
New Zealand the country code is AU. This country code is displayed on the start-up screen of the
Bridgemate.
If you want to change the regional settings of the server, go to Server à Region selection.
The “Current region” function displays the current region. Select the new region and press “Set”. The
new region has now been set.
Setting the channel
The server and the Bridgemates must be set to the same channel to communicate with each other. To
set the channel on the server, use the Server à Channel selection menu.
The “Current channel” function displays the current channel. Select the new channel and press “Set”.
The new channel has now been set.