User Manual

Chapter 5: Use of the Bridgemate® II scoring devices 45
The TD-menu consists of two pages. Use the up and down function key to navigate between the two
pages. To exit the menu, press the BACK function key.
Menu options
The TD-menu has ten options:
1. To enter an arbitral (adjusted) score, press ‘1’.
2. For an overview of the entered scores, press ‘2’.
3. To delete an entry, press ‘3’.
4. If you would like to view the corresponding table and section of the Bridgemate and/or the
corresponding round and pairs, press ‘4’ (retrieve status).
5. To retrieve an overview of the board numbers not yet entered, press ‘5’.
6. To retrieve a score recap of the current round, press ‘6’.
7. A sub-menu for various hand record functions.
8. To reset the Bridgemate, press ‘0’.
9. To set the contrast of the screen, press + or -.
10. To retransmit all scores to the server, press the RESEND function key.
All options are available from both pages by pressing the corresponding key. There is no need to
move to page which lists the options in order to use them.
Entering an arbitral score
It is possible to specify in the Bridgemate that an adjusted score must be entered for a certain board.
Proceed as follows: in the principle entry screen of the Bridgemate, enter the board number and
confirm with OK. The cursor is positioned at CONTR. Now access the TD-menu by pressing the
TDMENU function key, enter the PIN code, and once arrived in the TD-menu, press '1'. The following
screen appears:
Enter the arbitral score for both pairs. You can choose between 40% (average-minus), 50% (average)
and 60% (average-plus). Press 4 or – key to enter 40%, 5 or = key to enter 50%, 6 or + key to enter
60%. It is not possible to enter a value other than these percentages. Press OK after you have entered
both percentages. The Bridgemate will now return to the result entry screen and the assigned arbitral
score is now displayed at CONTR. Press OK to confirm this, and confirm the verification screen. The