User Manual

Safety instructions 5
Safety instructions
Important safety warning
Failure to properly set up, use, and care for the Bridgemate Pro system can increase the risk of
serious injury or death, or damage to the system. Read this manual and the manuals of any
peripherals for important safety and health information. Keep all manuals for future reference. For
replacement manuals, go to www.bridgemate.com/support.php or contact your local Bridgemate
supplier.
Select a safe location for the Bridgemate server and scoring devices
If the Bridgemate Pro server or Bridgemate Pro scoring devices falls and hits someone, it could cause
serious injury. To reduce the risk of such injuries and damage to parts of the system, set them up
according to these instructions and place them on a surface that:
• Is flat and level.
• Is stable and not likely to tip over.
• Allows all four feet of both the server and scoring device to be in contact with the surface.
• Is not likely to allow the server and scoring device to slip or slide off.
• Is clean and free of dust and debris.
If the surface or feet of server or scoring devices become dirty or dusty, clean them with a dry cloth.
Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on
them as they move around or walk through the area. When the Bridgemate Pro server is not in use,
you may need to disconnect all cables and cords from the server to keep them out of the reach of
children and pets. Do not allow children to play with cables and cords.
Do not place any part of the Bridgemate Pro system on a bed, sofa, or other soft surface. Do not place
any part near heat sources, such as radiators, heat registers, stoves, or amplifiers.
Avoid smoke and dust
Do not use the Bridgemate Pro system in smoky or dusty locations. Smoke and dust may damage the
Bridgemate Pro server and scoring devices.
Connect the Bridgemate Pro server to power
WARNING
As with many other electrical devices, failure to take the following precautions can result in serious
injury or death from electric shock or fire or damage to the Bridgemate Pro system.
Select an appropriate power source for your Bridgemate Pro server:
• Use only the power supply unit that came with the Bridgemate Pro server or that you received
from your Bridgemate supplier. If you are not sure if you have the correct power supply unit,
stop using it and contact your Bridgemate supplier. If you need a replacement power supply
unit, contact your Bridgemate supplier as well.