Specifications

Our innovative Windows
®
-based Control Manager software allows you to setup, program, and test
the many LTR and Conventional controller parameters quickly and easily:
• Area Bit, SYNC Status, RX and TX Data Polarity, Repeater Number
• Password, SYSOP Home/IDENT, Remote PIN
• Validation Table Management
• TX Audio, TX Data, and CWID Levels, DeEmphasis
• Idle Message Update Timer, Fade Timer, TX Timeout Time, and TX Data Lead In Delay
• Repeater/Base Mode Operation
• Transmit Audio – 0-2.5 V pk-pk
• Receive Audio – 0-5 Volts
• Transmit Data – 0-2.5 V pk-pk
• PTT Output – Open Drain Pull to Ground
• COR Input 5V Active Low
• Repeater and Control Bus – RJ45
• TL-NET Audio Bus – RJ45
SPECIFICATIONS for Both Models:
CONTROL MANAGER Software:
9