User's Manual
Table Of Contents
- Installation of E60 products
- General
- Equipment Packing & Unpacking
- Equipment Inventory for E60 products
- Qty Description
- Qty Description
- Installation Tools
- Radio Mount Installation E60 products
- Wall Mounting
- Pole Mounting
- 3.5.1 Antenna Mount Installation E60X products
- Radio Installation
- Cable Installation
- Antenna Alignment E60 systems
- Test Cable
- Operation of E60, E60X radios & configuration of network equipment
- Troubleshooting
TM
GE60 Installation Manual
580-00507, rev 1 31 of 46
7. Attach the radio to the back of the antenna and tighten the four (4) bolts.
See 6. for details.
Figure 3-10.1 Attaching the radio to the back of the antenna
8.Adjust azimuth (Side to Side)
1. Loosen the 4
Azimuth lock bolts
2. Adjust eyebolt
length using a 9/16
open-end wrench to
required location
3. Secure the 4
Azimuth lock bolts
(tighten until lock
washers are flatend)
Fi
g
ure 3-11.1 Azimuth ali
g
nment detail