User's Manual
Table Of Contents
- Installation of E60 products
- General
- Equipment Packing & Unpacking
- Equipment Inventory for E60 products
- Qty Description
- Qty Description
- Installation Tools
- Radio Mount Installation E60 products
- Wall Mounting
- Pole Mounting
- 3.5.1 Antenna Mount Installation E60X products
- Radio Installation
- Cable Installation
- Antenna Alignment E60 systems
- Test Cable
- Operation of E60, E60X radios & configuration of network equipment
- Troubleshooting
TM
GE60 Installation Manual
580-00507, rev 1 34 of 46
Figure 3-7: Front view of fiber and power cable installed on a vertically polarized E60 unit.
Figure 3-8: Inside view of fiber and power cable connected E60 or E60X unit
Note: The fiber cable is inserted through the straight through fitting on the left and the
power cable is inserted through the fitting on the right. Both the cables have been looped
around the inside of the enclosure to minimize tension on the cables when connected to
the radio and to maintain proper bend-radius of the fiber cable.