User's Manual

TM
GE60 Installation Manual
580-00507, rev 1 43 of 46
4 Operation of E60, E60X radios & configuration of network
equipment
The E60 product line has been designed such that it requires no user configuration.
During normal operation, the following conditions should exist at the radio:
1 The power LED should be lit—solid green;
2 The fiber LED should be lit—solid green;
3 The Link Up LED should be lit—solid green; and
4 The Link Quality BER voltage should be 3.3v, although dips in voltage
are acceptable during periods of precipitation.
Figure 4-1: Link Up, Fiber and Pwr (Power) LED’s indicating link is up and operating
The E60(X) radios them self do not require periodic maintenance. However, each end of
the link should be periodically inspected for visible damage or excessive accumulation of
dirt on the antenna’s radome (the front cover of the radio).