User's Manual
Table Of Contents
- Installation of E60 products
- General
- Equipment Packing & Unpacking
- Equipment Inventory for E60 products
- Qty Description
- Qty Description
- Installation Tools
- Radio Mount Installation E60 products
- Wall Mounting
- Pole Mounting
- 3.5.1 Antenna Mount Installation E60X products
- Radio Installation
- Cable Installation
- Antenna Alignment E60 systems
- Test Cable
- Operation of E60, E60X radios & configuration of network equipment
- Troubleshooting
TM
GE60 Installation Manual
580-00507, rev 1 18 of 46
CAUTION! Tampering with seals will void the warranty.
Notice the warranty stickers on the inner (metal) cover of the radio. The radio is sealed at
the factory. There is no need to open this cover in the field. Tampering with these seals
will void the warranty.
3.3.1 Equipment Inventory for E60X products
Each carton is accompanied by a packing list. Verify the contents of the carton against
the packing list. Following are inventory lists for a typical system.
Qty Description
2 ea. GE60X Radios (1 Low band & 1 High band)
2 ea. AC-DC power adapters & power cords
2 ea. Pole Mount Kits
1 ea. CD-ROM containing Installation Manual (1 provided per pair of radios)
2 ea. Power cables with DC power connectors attached for use with outdoor radio
8 ea. DC power connectors
2 ea Antenna and mount kits
GE60X Antenna and Mount Kit Parts List
Item Description Qty.
1 Antenna 1
2 Lower Pole mount
assembly
1
3
Upper Pole mount
assembly
1
4
Antenna mounting
plate
1
5 3/8 bolts 2
6 3/8 lock washers 2
7 3/8 flat washer 2
8 3/8 nylon washer 2
Figure 3-1
CAUTION! Tampering with seals will void the warranty.
Notice the warranty stickers on the inner (metal) cover of the radio. The radio is sealed at
the factory. There is no need to open this cover in the field. Tampering with these seals
will void the warranty.