User's Manual
Table Of Contents
- Installation of E60 products
- General
- Equipment Packing & Unpacking
- Equipment Inventory for E60 products
- Qty Description
- Qty Description
- Installation Tools
- Radio Mount Installation E60 products
- Wall Mounting
- Pole Mounting
- 3.5.1 Antenna Mount Installation E60X products
- Radio Installation
- Cable Installation
- Antenna Alignment E60 systems
- Test Cable
- Operation of E60, E60X radios & configuration of network equipment
- Troubleshooting
TM
GE60 Installation Manual
580-00507, rev 1 24 of 46
3.5.1 Antenna Mount Installation E60X products
WARNING!
1. Read these instructions before beginning installation. Caution should be used.
Qualified persons experienced with antenna assembly and installation are required for
installation.
2. BridgeWave Communications Inc. disclaims any responsibility or liability for
damage or injury resulting from incorrect or unsafe installation practices.
3. The antenna has been formed to a very close tolerance parabolic shape. Careful
handling and assembly is required to avoid denting the reflector, which would degrade
antenna performance.
1. Attach the upper pole mount.
Figure 3-2.1
Confirm that the Mount is
centered as shown.
Tighten bolts Securely