User's Manual

GE60 Installation Manual

580-00507, rev 1 4 of 46

• The BridgeWave 60GHz product line meets all applicable FCC safety

requirements for radio equipment; however, it is best to avoid prolonged,

unnecessary exposure to the front of the radio while it is operating. The exposure

one would receive from aligning the radio is not harmful to humans.

• The outdoor equipment must be properly grounded to provide some protection

against voltage surges and built-up static charges. In the event of a short circuit,

grounding reduces the risk of electrical shock.

For installations in the U.S.A., refer to Articles 810830 of the National Electrical

Code, ANSI/NFPA No. 70, for information with respect to proper grounding and

applicable lightning protection for DC cables.

For installations in all other countries, implement protection in accordance with

the safety standards and regulatory requirements of the country where the

equipment is to be installed.

• Do not install or operate this equipment in the presence of flammable gases or

fumes. Operation of any electrical instrument in such an environment constitutes

a definite safety hazard.

• Do not install substitute parts or perform any unauthorized modification to the

equipment. Changes or modifications not expressly approved by BridgeWave can

void the user’s authority to operate the equipment.

Regulatory Information

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and,

(2) This device must accept any interference that may cause undesired

operation.

Equipment Precautions

Water and Moisture - The E60 product line is designed to withstand moisture conditions

typically encountered when installed outdoors.

Power Sources - This product should only be operated with the type of power source

provided by BridgeWave Communications Inc.