Installation Guide

ITALIA FAUCETS, INC.| 877-ITALIA-2 (877-482-5422) | [e-mail]
Moncalieri
INSTALLATION
BRN-MCRC1
BRN-MCRC1D
B rie n z a
by I TALI A
Single Hole Bathroom Faucet
Shut off water supplies. Remove old faucet. Clean
sink/counter surface in preparation for new faucet
Screw the mounting stud into the body. Secure the
faucet to sink/counter by installing steel washer and
nut. Tighten with wrench.
IMPORTANT: After installation is complete, remove
aerator and turn on water supply and allow both hot
and cold water to run for at least one minute each.
While water is running check for leaks; make
adjustments if necessary. Reinstall aerator. Your new
faucet is now ready for use.
MAINTENANCE:
Your new bathroom sink faucet is desgined for years of trouble-free
performance. Keep it looking new by cleaning it periodically with a soft
cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these
will dull the finish and void your waranty.
Apply pipe tape onto threads of water supplies. Use
wrench when tightening the hose connection. Do not
overtighten.
Place flange on bottom of new faucet, the position
faucet through mounting hole.
TOOLS:
Adjustable Wrench
Pliers
Pipe Wrench
Screwdriver
Teflon Tape