2000PSI Operator’s Manual / Manual del Operario WARNING ADVERTENCIA Before using this product, read this manual and follow all Safety Rules and Operating Instructions. Antes de utilizar el producto, lea este manual y siga todas las Reglas de Seguridad e Instrucciones de Uso.
SpeedClean™ 2000 PSI Pressure Washer SAVE THESE INSTRUCTIONS TABLE OF CONTENTS SAFETY RULES Safety Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 Know Your Pressure Washer. . . . . . . . . . . . . . . . . . . . . . . . 6 Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13 Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SpeedClean™ 2000 PSI Pressure Washer WARNING WARNING Running engine gives off carbon monoxide, an odorless, colorless, poison gas. Breathing carbon monoxide can cause nausea, fainting or death. Some chemicals or detergents may be harmful if inhaled or ingested, causing severe nausea, fainting or poisoning. Fuel and its vapors are extremely flammable and explosive. Fire or explosion can cause severe burns or death.
SpeedClean™ 2000 PSI Pressure Washer WARNING WARNING Rapid retraction of starter cord (kickback) will pull hand and arm toward engine faster than you can let go. Broken bones, fractures, bruises or sprains could result. The high pressure stream of water that this equipment produces can pierce skin and its underlying tissues, leading to serious injury and possible amputation. Spray gun traps high water pressure, even when engine is stopped and water is disconnected, which can cause injury.
SpeedClean™ 2000 PSI Pressure Washer CAUTION CAUTION Excessively high or low operating speeds increase risk of injury and damage to pressure washer. Improper treatment of pressure washer can damage it and shorten its life. • If you have questions about intended use, ask dealer or contact Briggs & Stratton Power Products. • NEVER operate units with broken or missing parts, or without protective housing or covers. • DO NOT by–pass any safety device on this machine.
SpeedClean™ 2000 PSI Pressure Washer KNOW YOUR PRESSURE WASHER Read this Operator’s Manual and safety rules before operating your pressure washer. Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
SpeedClean™ 2000 PSI Pressure Washer ASSEMBLY PREPARING PRESSURE WASHER FOR USE IMPORTANT: Read entire operator’s manual before you attempt to assemble or operate your new pressure washer. If you have any problems with the assembly of your pressure washer or if parts are missing or damaged, call the pressure washer helpline at 1-800-743-4115. If calling for assistance, please have the model, revision, and serial number from the data tag available. Unpack the Pressure Washer 1.
SpeedClean™ 2000 PSI Pressure Washer Install Wheel Kit 3. The wheel kit is designed to greatly improve the portability of your pressure washer. NOTE: Wheel kit is not intended for over-the-road use. NOTE: Be sure to install wheel with raised hub inboard. 4. 5. 6. Refer to Figure 2 and install the wheel kit as follows: 1. Place the bottom of the pressure washer frame on a flat, even surface.Temporarily place unit on blocks to ease assembly. 2. Slide a wheel over the axle.
SpeedClean™ 2000 PSI Pressure Washer Connect Hose and Water Supply to Pump 4. IMPORTANT: DO NOT siphon standing water for the water supply. Use ONLY cold water (less than 100°F). IMPORTANT: To avoid pump damage, you must assemble the nozzle extension to the spray gun and attach all hoses before you start the engine. 1. 5. Uncoil high pressure hose and attach one end of hose to base of spray gun (Figure 3).Tighten by hand. Connect the garden hose (not to exceed 50 feet in length) to the water inlet.
SpeedClean™ 2000 PSI Pressure Washer HOW TO USE YOUR PRESSURE WASHER How to Start Your Pressure Washer To start your pressure washer for the first time, follow these instructions step-by-step.This starting information also applies if you have let the pressure washer sit idle for at least a day. If you have any problems operating your pressure washer, please call the pressure washer helpline at 1-800-743-4115. 1.
SpeedClean™ 2000 PSI Pressure Washer 9. When starting engine, position yourself as recommended in Figure 9 and start engine according to instructions given in engine operator’s manual.Also see operating instructions tag located on the pressure washer. NOTE: Always keep the throttle lever in the “Fast” position when operating the pressure washer. WARNING Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C). Severe burns can occur on contact.
SpeedClean™ 2000 PSI Pressure Washer How to Use the Adjustable Nozzle 3. You should now know how to START and STOP your pressure washer.The information in this section will tell you how to adjust the spray pattern and to apply detergent or other cleaning chemicals. Twisting nozzle adjusts spray pattern from a narrow pattern to a fan pattern (Figure 12).
SpeedClean™ 2000 PSI Pressure Washer 4. Slide adjustable nozzle forward to low pressure mode. Detergent cannot be applied with nozzle in high pressure position. 3. Apply a high pressure spray to a small area, then check the surface for damage. If no damage is found, it is okay to continue cleaning. 5. Make sure garden hose is connected to water inlet. Check that high pressure hose is connected to spray gun and pump. Start engine. 4.
SpeedClean™ 2000 PSI Pressure Washer SPECIFICATIONS PRESSURE WASHER MAINTENANCE Outlet Pressure . . . . . 2000 psi Flow Rate . . . . . . . . . . 1.9 gallons per minute (gpm) Detergent . . . . . . . . . . Use detergent approved for pressure washers Water Supply . . . . . . Not to Exceed 100°F Temperature Automatic Cool . . . . Will cycle when water Down System reaches 125°-155°F Shipping Weight . . . .54 lbs. Check and Clean Inlet Screen Examine the screen on the water inlet.
SpeedClean™ 2000 PSI Pressure Washer 1. 2. 3. 4. Detach spray gun and nozzle extension from high pressure hose. Detach nozzle extension from spray gun and remove o-ring and screen from nozzle extension. Flush screen, spray gun, and adjustable nozzle extension with clean water to clear debris. Place in-line filter screen into threaded end of nozzle extension. Direction does not matter. Push screen in with eraser end of pencil until it rests flat at bottom of opening.Take care not to bend the screen.
SpeedClean™ 2000 PSI Pressure Washer ENGINE MAINTENANCE Protecting the Pump See the engine operator’s manual for instructions on how to properly maintain the engine. To protect the pump from damage caused by mineral deposits or freezing, use PumpSaver to treat pump.This prevents freeze damage and lubricates pistons and seals. CAUTION NOTE: PumpSaver is available as an optional accessory. It is not included with the pressure washer. Contact the nearest authorized service center to purchase PumpSaver.
SpeedClean™ 2000 PSI Pressure Washer TROUBLESHOOTING Problem Cause Correction 1. Nozzle in low pressure mode. 1. Pull nozzle backward for high pressure mode. 2. Water inlet is blocked. 2. Clear inlet. 3. Inadequate water supply. 3. Provide adequate water flow. Inlet hose is kinked or leaking. 4. Straighten inlet hose, patch leak. Clogged inlet hose strainer. 5. Check and clean inlet hose strainer. Water supply is over 100°F. 6. Provide cooler water supply.
SpeedClean™ 2000 PSI Pressure Washer NOTES 18
BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC PRESSURE WASHER OWNER WARRANTY POLICY Effective December 1, 2005 replaces all undated Warranties and all Warranties dated before December 1, 2005 LIMITED WARRANTY Briggs & Stratton Power Products Group, LLC will repair or replace, free of charge, any part(s) of the pressure washer that is defective in material or workmanship or both. Transportation charges on product submitted for repair or replacement under this warranty must be borne by purchaser.
Lavadora de Presión 2000 PSI de SpeedClean™ CONSERVE ESTAS INSTRUCCIONES TABLA DE CONTENIDOS REGLAS DE SEGURIDAD Reglas De Seguridad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-23 Conozca Su Lavadora de Presión . . . . . . . . . . . . . . . . . . . . . . . . 24 Ensamblaje . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-26 Funcionamiento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-30 Especificaciones Del Producto . .
Lavadora de Presión 2000 PSI de SpeedClean™ ADVERTENCIA ADVERTENCIA Al motor funcionar, se produce monóxido de carbono, un gas inodoro y venenoso. El respirar el monóxido de carbono, producirá náusea, desmayo o la muerte. Algunas sustancias químicas o los detergentes pueden ser perjudiciales si inhalados o ingeridos, causando la náusea severa, desmayando o para envenenar. La gasolina y sus vapores son extremadamente inflamables y explosivos.
Lavadora de Presión 2000 PSI de SpeedClean™ ADVERTENCIA ADVERTENCIA El rápido repliegue del cable del arrancador (retroceso) impedirá que el usuario suelte el cable a tiempo y tirará de su mano y brazo hacia el motor. Como resultado, podrían producirse fracturas, contusiones o esguinces. La corriente de agua de alta presión que produce este equipo pueden perforar la piel y sus tejidos profundos, ocasionando lesiones serias y posible amputación.
Lavadora de Presión 2000 PSI de SpeedClean™ PRECAUCIÓN PRECAUCIÓN Hacer funcionar el motor a velocidades excesivas aumenta el riesgo de lesiones personales. El tratamiento inadecuado del lavadora de presión puede dañarlo y acortar su vida productiva. • NO juegue con partes que puedan aumentar o disminuir la velocidad de mando. • NO opere la máquina lavadora a presión con un valor de presión superior a su clasificación de presión.
Lavadora de Presión 2000 PSI de SpeedClean™ CONOZCA SU MAQUINA LAVADORA A PRESION Lea el manual del operario y las reglas de seguridad antes de poner en marcha su máquina lavadora a presión. Compare las ilustraciones con su máquina lavadora a presión para familiarizarse con las ubicaciones de los diferentes controles y ajustes. Guarde este manual para referencias futuras.
Lavadora de Presión 2000 PSI de SpeedClean™ MONTAJE IMPORTANTE: Lea totalmente el manual del operario antes que intente ensamblar u operar su lavadora a presión. 6. 7. 8. Desembale la Lavadora a Presión Conecte el Manubrio 1. Saque todo el contenido de la caja de cartón, a excepción de la lavadora a presión. 2. Abra completamente la caja de cartón cortando cada una de sus esquinas de arriba abajo. 3. Saque la lavadora a presión de la caja de cartón. 1.
Lavadora de Presión 2000 PSI de SpeedClean™ Agregar Aceite al Motor y Combustible • Figura 20 — Conectar la Manguera del Jardín a la Entrada de Agua Inspeccione la rejilla de entrada. NO la use si está dañada, límpiela si se encuentra sucia. Coloque la lavadora a presión sobre una superficie nivelada. PRECAUCIÓN Cualquier intento para arancar el motor antes de haberle proporcionado el mantenimiento apropiado con el aceite recomendado, podría ocasionar la falla del motor.
Lavadora de Presión 2000 PSI de SpeedClean™ CÓMO USAR SU MÁQUINA LAVADORA A PRESIÓN Cómo Darle Arranque a su Máquina Lavadora a Presión Para darle arranque a su máquina lavadora a presión movida a motor por primera vez, siga estas instrucciones paso a paso. Esta información acerca del arranque inicial también se aplica cuando vaya a darle arranque al motor después de haber dejado de la máquina lavadora a presión fuera de uso por al menos un día. 1.
Lavadora de Presión 2000 PSI de SpeedClean™ 9. Cuando arranque el motor, colóquese en la posición recomendada en la Figura 24 y siga las instrucciones del manual del operario del motor. Consulte también la etiqueta de instrucciones situada en la limpiadora a presión. NOTA: Siempre mantenga la control de válvula de admisión en el “Rápido” (“Fast”) posicione cuándo operar la arandela de la presión. ADVERTENCIA Los motores al funcionar producen calor.
Lavadora de Presión 2000 PSI de SpeedClean™ 3. Cómo Usar la Boquilla Ajustable Usted ya debe saber como darle ARRANQUE a su máquina lavadora a presión y como DETENERLA. La información de esta sección le dirá como ajustar el patrón de rociado y como aplicar detergente u otros químicos de limpieza. El patrón de rociado se ajusta de un patrón angosto a un patrón en abanico girando la boquilla (Figura 27).
Lavadora de Presión 2000 PSI de SpeedClean™ 4. Mueva la boquilla ajustable hacia adelante para obtener el modo de baja presión. El detergente no puede ser aplicado si tiene la boquilla en la posición de alta presión. 3. Aplique un rociado de alta presión en un área pequeña, después revise si la superficie presenta daños. Si no encuentra daños, puede continuar con el trabajo de limpieza. 5. Asegúrese que la manguera de jardín esté conectada a la entrada del agua.
Lavadora de Presión 2000 PSI de SpeedClean™ ESPECIFICACIONES Revise la Manguera de Alta Presión Presión de Salida . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 PSI Las mangueras de alta presión pueden desarrollar fugas debido al desgaste, dobleces o abuso. Revise la manguera antes de cada uso. Revise si existen cortes, fugas, abrasiones, levantamiento de la cubierta, daño o movimiento de los acoplamientos. Si existe cualquiera de estas condiciones, remplace la manguera inmediatamente.
Lavadora de Presión 2000 PSI de SpeedClean™ 3. Coloque el anillo 'o' en la ranura respectiva. Empuje el anillo 'o' hasta que quede ajustado contra el colador del filtro en línea. 6. Instale de nuevo la boquilla y en el filtro en-línea en la extensión. NO la apriete demasiado con la llave Allen. 4. Conecte la extensión para boquillas a la pistola de rociado de la manera descrita anteriormente en este manual. 7. Conecte de nuevo la extensión de la boquilla a la pistola rociadora. 8.
Lavadora de Presión 2000 PSI de SpeedClean™ PREPARANDO LA UNIDAD PARA SU ALMACENAMIENTO Al uso el PumpSaver, cerciórese la arandela de la presión se apaga y desconecta del agua del suministro. Lea y siga todas instrucciones y las advertencias dadas en el contenedor de PumpSaver. El agua no debe permanecer en la unidad por un largo periodo de tiempo. Los sedimentos o minerales se pueden depositar en las piezas de la bomba y "congelar" la acción de la bomba.
Lavadora de Presión 2000 PSI de SpeedClean™ REPARACION DE AVERIAS Problema La bomba presenta los siguientes problemas: no produce presión, produce una presión errada, traqueteo, pérdida de presión, bajo volumen de agua. El detergente no se mezcla con el rociado. Causa Solución 1. La boquilla está en el modo de baja presión. 1. Mueva la boquilla hacia atrás para el modo de alta presión. 2. La entrada de agua está bloqueada. 2. Limpie la entrada. 3. Suministro de agua inadecuado. 3.
Lavadora de Presión 2000 PSI de SpeedClean™ NOTAS 35
POLÍTICA DE GARANTÍA PARA EL PROPIETARIO DE UNA LAVADORA A PRESIÓN BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC Fecha de entrada en vigor:1 de Diciembre de 2005. Sustituye a todas las garantías sin fecha y a las de fecha anterior al 1 Diciembre de 2005. GARANTÍA LIMITADA Briggs & Stratton Power Products Group, LLC reparará o sustituirá sin cargo alguno cualquier componente de la lavadora a presión que presente defectos de materiales y/o mano de obra.