Pressure Washer Operator's Manual

SpeedClean™ 2200 PSI Pressure Washer
6
KNOW YOUR PRESSURE WASHER
Read this Operator’s Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Adjustable Nozzle Extension — Adjustable nozzle
allows you to adjust spray pressure and spray pattern.
Air Filter — Protects engine by filtering dust and debris
out of intake air.
Automatic Cool Down System — Cycles water
through pump when water reaches 125°-155°F.Warm
water will discharge from pump onto ground.This system
prevents internal pump damage.
Cleaning Tank — Use to hold up to one gallon of
pressure washer detergent.
Data Tag (not shown, near rear of base plate) –
Provides model and serial number of pressure washer.
Please have these readily available if calling for assistance.
High Pressure Hose — Connect one end to water
pump and the other end to spray gun.
High Pressure Outlet — Connection for high pressure
hose.
Oil Fill/Dipstick — Check and fill with oil here.
Primer Bulb — Prepares a cold engine for starting.
Pump — Develops high pressure.
Recoil Starter — Used for starting the engine manually.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
Throttle Control Lever — Sets engine in starting mode
for recoil starter and stops a running engine.
Water Inlet — Connection for garden hose.
Throttle Control Lever
Pump equipped with Automatic
Cool Down System
Oil Fill/Dipstick
Recoil Starter
Primer Bulb
Air Filter
High Pressure Outlet
& Water Inlet
Spray Gun
High Pressure Hose
Adjustable Nozzle Extension
Cleaning Tank