Manual

if youhaveanyproblemsoperatingyourpressurewasher,
pleasecarlthepressurewasherhelplineat(800}743-4115,
Pressure Washer Location
Carbon Monoxide Poisoning
A WARNING POISONOUS GAS HAZARD. Engine
exhaust contains carbon monoxide, a poisonous
gas that could kill you in minutes. You CANNOT
smell it, see it, or taste it. Even if you do not
smell exhaust fumes, you could still be exposed to carbon
monoxide gas.
, Operatethis product ONLY outside far awayfrom windows,
doors and vents to reducethe risk of carbon monoxide gas
from accumulating and potentially being drawn towards
occupied spaces.
* Install battery-operated carbon monoxidealarms or plug-in
carbon monoxide alarms with battery back-up according to the
manufacturer's instructions. Smoke alarms cannot detect
carbon monoxide gas.
* DO NOTrun this product inside homes, garages,basements,
crawlspaces, sheds, or other partially-enclosedspaces even if
using fans or opening doors and windows for ventilation.
Carbon monoxide canquickly build up in these spacesand can
finger for hours, even after this product has shut off.
* ALWAYS placethis product downwind and point the engine
exhaustawayfrom occupied spaces.
if you start to feel sick, dizzy, or weakwhile using this product,
shut it off and getto fresh air RIGHTAWAY. See a doctor. You
may havecarbon monoxide poisoning.
Exhaust Port
Pointed away from
occupied spaces
New te Start Your Pressure Washer
To start your pressure washer for the first time, follow these
instructions step-by-step. This starting information also
@pries if you have let the pressure washer sit idle for at bast
a day.
1. Place pressure washer near an outside water source
capable of supplying water at a flow rategreaterthan
3.5 gallons per minute and no lessthan 20 PSi at
pressure washer end of garden hose. DO NOTsiphon
supply water.
2. Checkthat high pressure hose is tightly connected to
spray gun and pump. SeeAssembly section.
3. Make sure unit is in a level position.
4. Connectgarden hose to water inlet on pressure washer
pump.
NOTICE DO NOTrun the pump without the water supply
connected and turned on.
. Damageto equipmentresultingfromfailureto followthis
instructionwill voidwarranty.
5. Turn ONwater, point gun in a safedirection, press red
button andsqueezetrigger to purge pump system of air
and impurities.
6. Attach nozzleextensionto spray gun. Tighten by hand.
.
Choosespray tip you want to use, puff back on collar of
nozzleextension, insert spray tip and releasecollar. Tug
on spray tip to makesure it is securely in place. See
How to UseSpray Tips.
8. Push engine rocker switch (A) to on position (Ier ON).
Risk ef Fire Clearances
A WARNING Exhaust heat/gasescould ignite
combustibles, structures or damagefueltank
causing afire, resultingin death or seriousinjury.
* Keepat least5 fL (1.5 m) clearanceon all sides of pressure
washer including overhead.
12 BRIGGSandSTRATTON.CONI