Installation Guide
27
(L) Oil Drain Hose — Provided to facilitate oil changing.
(M) Generator Data Label — Identifies generator model number and serial number. Located inside battery access
compartment.
17kW and 20kW Generator (Back View)
(A) Lifting Holes — Provided at each corner for lifting generator.
(B) Fuel Solenoid — Automatically opens and closes to supply fuel to unit when needed.
(C) Fuel Regulator — Controls fuel flow to engine for proper operation.
(D) Fuel Selector Valve — Used to select proper fuel type (LP or NG).
(E) Spark Plug — A device in the cylinder head of the engine that ignites the fuel mixture by means of an electric spark.
(F) ON/ OFF Switch — Used to turn the generator on (I) and off (0).
(G) Oil Fill Cap — Location for adding oil to engine.
(H) Electrical Field Wiring Inlet — Wires to and from generator are centered in this location.
(J) Fuse Holder— For the 15 Amp ATO-type fuse (fuse holder is located in the upper battery bay).
(K) Air Cleaner — Uses a dry type filter element to protect engine by filtering dust and debris out of intake air.
(L) Engine Oil Dipstick — Allows user to check engine oil level easily.
(M) Oil Heater — Provided to warm engine oil to promote easy starting in cold climates.
Not for
Reproduction