Specifications

7
20
NOTE: SPECIFICATION TABLES BEGIN ON PAGE 41 OF THIS SECTION.
Disassemble, Inspect and Clean
Starter Motor
1. Examine Fig. 33, Exploded View prior to
disassembly.
2. Remove the starter cover (1), nylon spur gear
retainer (2), and the nylon spur gear (4).
3. Remove the three screws (5) holding the starter
gear cover (6) and remove the cover.
4. Lift the clutch assembly– (gasket [7], felt washer
[8], and drive gear [9]) – and the pinion gear (11) off
their respective shafts.
Fig. 33: Starter gear helix (3)
Brake bandmounting post – early
Models (10)
Gray plastic end play washers (12)
Armature (13)
Housing (14)
Thrust washer (15)
Insulator (16)
Brush end cap with brushes and springs (17)
Thru bolts (18)
Fig. 33
4
17
18
13
16
14
15
9
8
1
2
3
5
7
6
10
12
11