Operating instructions

agria Multi-Purpose Machine 400E/400K 29
Drive-wheels
with 4.00-8 field tyres
for ploughing and mowing
Fit the drive-wheels
l Push the hub pipe (2) of the drive-
wheel onto the wheel shaft (1).
Fit the drive-wheel with the pointed parts
of lugs showing in travel direction (seen
from above).
l Insert the hex bolts (3) together with
the star washers (4) into the borings of
the hub pipe and wheel shaft and tighten
at a torque of 80 Nm.
Remove the drive-wheels
To remove the drive-wheels reverse the
above process.
Drive-wheels 4.00-8 Field tyre
with differential hubs
The differential hubs are to facilitate
steering and turning and are used for
ploughing and mowing
Fit the differential hubs
Push the differential hubs (2) on the
wheel shaft.
l Insert the hex bolts (4) together with
the star washers (3) into the borings of
the hub pipe and wheel shaft and tighten
at a torque of 80 Nm.
l Use wheel bolts (7) and ball spring
washers (6) to fit the drive-wheels to the
differential hubs (torque of wheel bolts
is 80 Nm).
Fit the drive-wheel with the pointed parts
of lugs showing in travel direction (seen
from above).
Remove the drive-wheels
To remove the drive-wheels reverse the
above process.
3. Devices and Operating Elements
1 Wheel shaft
2 Differential hub
3 Star washer
4 Hex bolt
5 Wheel drive
6 Ball spring washer
7 Wheel bolt
1 Wheel shaft
2 Hub pipe of the drive-wheel
3 Hex bolt
4 Star washer
3