Operating instructions

30 agria Multi-Purpose Machine 400E/400K
Differential Hubs
The differential effect of hubs is factory-
set.
However, you can also fit them rigidly.
For this purpose, proceed as follows.
l Remove locking collar (4) with a pair
of pliers.
l Slightly pull the wheel flange (2)out-
wards. Twist it until the cam is between
both pins.
l Then push the wheel flange all the
way onto the differential hub and fit the
locking collar.
l Use a grease gun to lubricate wheel
flange nipple (3) (with Bio-grease) after
every 50 operating hours or after pres-
sure cleaning.
Wheel weights
Drive-wheels 4.00-8 with differential
hubs can be fitted with wheel weights
(Item no. 0421 011).
Fitting wheel weights
To fit wheel weights (2) onto the wheel
flange, use hex bolts(4) and star wash-
ers. (Torque 80 Nm)
3. Devices and Operating Elements
Rigid position Differential position
1 Differential hub
2 Wheel flange
3 Flange nipple
4 Locking collar (snap ring)
1 Drive-wheel
2 Wheel weight
3 Washer
4 Hex bolt
3
3