Operating instructions

64 agria Multi-Purpose Machine 400E/400K
Inspection and Maintenance Chart
A = Each time before you take up operation
B = After each cleaning
E = Nonrecurrent maintenance to be executed by professional workshop
K = Checks and maintenance to be executed by operator
W = Maintenance to be executed by professional workshop
F = Maintenance should be carried out by your agria workshop
* = after 2 years
5 8 25 50 100 250
Check saefty circuit function K 51
Check free play of levers K 51
Check wheel bolts K 29
Check air filter K 47
Clean cooling-screen K 48
Check engine oil level,
refill, if necessary
K K
45
46
Re-tighten cylinder head screws E 49
First engine oil change W 45
subsequent oil changes W 46
Clean engine K 53
Check transmission oil level K 50
Check bolts and nuts K 53
Clean air filter insert W W 47
Lubricate differential hub K K K 30
Replace air filter insert
earlier, if required!
W 47
Clean spark plug, adjust gap W 48
Replace spark plug K 48
Clean cylinder head F 49
Clean guide plates, cooling fins –
earlier, if required
F 48
Change transmission oil K 50
Lubricate all gliding parts K K 53
Lubricate wheel-shaft K K 50
Replace fuel hoses W* 47
Re-charge battery (400K)
- see battery
W* 49
A
Always after operating
hours
page
min.
after 3
months
min.
yearly B