User's Manual Part 1

IP Address

The IP address currently assigned to this device, either via

DHCP or static assignment. If no IP Address is listed the

network connection may be down or the Ethernet cable might

be unplugged.

Profiles

A list of profiles containing configuration settings for the

Ethernet network interface is provided here. The settings in

use will be shown as Currently Active. Other available

profiles will have a Make Active button next to the profile

name that allows you to change the settings used by the

Ethernet interface and restart the network.

Wireless Adapter (optional)

The Wireless LAN network interface is a device hardware option. When it is

present, a factory configured default profile initially set to obtain an IP Address

via DHCP is provided. However, the access point and security information will

need to be entered via the Wireless Settings page.

Enable Button

Enable the interface when it has been previously disabled

Disable Button

Disable the interface, preventing any traffic across the

interface

Restart Button

This button can be used to restart the Wireless LAN network

interface with the currently active profile settings.

IP Address

The IP address currently assigned to the WLAN interface,

either via DHCP or static assignment. If no IP Address is

listed the network connection may be down, the access point

security settings are incorrect, or the wireless access point is

unreachable.

AP Address

The access point hardware address is provided here. It is

taken directly from the access point when a wireless

connection is established. If the address shows as all 0s no

connection is present.

Profiles

A list of profiles containing configuration settings for the

Wireless LAN network interface is provided here. The

settings in use will be shown as Currently Active. Other

available profiles will have a Make Active button next to the

profile name that allows you to change the settings used by

the Wireless LAN interface and restart the network.