User's Manual Part 1

13
Software
Software Upgrades
Using the HTTP Installer
The Software Upgrades page on the device configuration web site allows you to
install platform software and firmware upgrades. Use the Browse button on this
screen to locate the software package on the local machine and click on the
Install button to initiate the upload of the package file. Once uploaded the
upgrade will be automatically started. Once the upgrade begins you will loose
your browser connection to the device. The LEDs will flash to indicate the
upgrade is being performed. The software upgrade notification screen will
attempt to refresh to indicate the upgrade is complete.
Recovering from a Failed Upgrade
In the event a platform software and firmware upgrade fails in such a way that
the device cannot operate normally, a recovery mode will be activated. In this
mode the device will boot into a limited configuration that will allow you to apply a
product software upgrade via the provided web interface. You should not