User's Manual

Software

Software Upgrades

Using the HTTP Installer

The Software Upgrades page on the device configuration web site allows you to

install platform software and firmware upgrades. Use the Browse button on this

screen to locate the software package on the local machine and click on the

Install button to initiate the upload of the package file. Once uploaded the

upgrade will be automatically started. Once the upgrade begins you will loose

your browser connection to the device. The BUSY LED will be turned on to

indicate the upgrade is being performed. The software upgrade notification

screen will attempt to refresh to indicate the upgrade is complete.

If you wish to reset the device during the upgrade process, click on the checkbox

labeled as Perform a CLEAN Install.

If a failure occurs during the upgrade, all LEDs will be turned on to indicate a

problem exists. If this should occur follow the procedure outlined below.