User's Manual

Recovering from a Failed Upgrade

In the event a platform software and firmware upgrade fails in such a way that

the device cannot operate normally, remove and then reattach the device power

source. The device will reboot into a recovery mode. In this mode the device will

boot into a limited configuration that will allow you to apply a product software

upgrade via the provided web interface. You should not attempt to use the

device for anything but a software upgrade when in recovery mode.

Installing Applications

Applications are installed in the same manner as platform software and firmware

upgrades, using the Software Upgrades web page. Use the Browse button on

this screen to locate the software package on the local machine and click on the

Install button to initiate the upload of the package file. Once uploaded the

upgrade will be automatically started. If the application provides progress

information, it will be displayed in a popup window opened by the Software

Upgrades web page.