Manualshelf

User Manual

ManualsBrandsBrightlink AV ManualsAccessories & SuppliesBrightlink PRO-Mix 4K Seamless Modular Matrix 12 HDMI Input x 32 HDBaseT Output Configuration (c/w 32 Receivers Over Cat6 Up to 228ft) - Front Panel 7” Touch Screen - Free Brightlink Control APP
12345678910
BL-PRO-MIX- 8*8/18*18/32*32
input interface. VGA, YPBPR, CVBS adopts the VGA input interface. Reticle
signal adopts the standard RJ45 interface. There is a 120m transmission distance
reticle and a 70m transmission distance reticle. Optical fiber signal adopts the
single core LC fiber interface.
4. Supports HDMI1.3 protocol, supports DVI1.0 protocol, supports HDCP protocol.
5. Supports 640*480/60Hz---1920*1200/60Hz (VESA standard), 480i---1080p
(HDTV standard) input. There are 16 kinds of output resolution ratios, and you
can choose the appropriate ratio by toggle switch.
3. Connection and operation
1. Connect signal source such as Blu-ray player, game controller, A/V receiver,
cables, satellite receiver, etc., to the HDMI input port of the matrix.
Please do not hotplug! Turn off power supply before plugging / unplugging cables.
Connecting signal sources with power-on may cause circuit damage.
2. Connect the HDMI output port of the matrix to the HDMI input port of the HD
display or HD projector. Note: it is recommended to use High-Speed HDMI Cable
over long transmission distances.
3. First, power on the signal source (input device), then power on the matrix via the
power supply.
4. Plug in power to each device in the same order.
5. After power on, every display device should display the specified signal (the
default signal is NO.1 input signal). Make sure the devices are working normally.