Manualshelf

User Manual

ManualsBrandsBrightlink AV ManualsAccessories & SuppliesBrightlink PRO-Mix 4K Seamless Modular Matrix in 32 HDMI Input x 32 HDBaseT Output Configuration (c/w 32 Receivers Over Cat6 Up to 228ft) - Front Panel 7” Touch Screen - Free Brightlink Control APP
20212223242526272829
BL-PRO-MIX- 8*8/18*18/32*32
Step 3: In the “SET” panel on the left side of the screen, click “Save”. If the
connection is successful, the status bar is displayed as green.
Step 4: Click “Load” to load the matrix parameters, as seen in Figure 6.3.3.
Please note: It is necessary to configure the PC’s IP address when we use LAN port
control mode. See Figure
6.3.4.
The factory default IP
address for the matrix is
192.168.0.80, therefore you
must set the PC’s IP
address to a number in the
192.168.0.XXX range.