User Manual

BL-PRO-MIX- 8*8/18*18/32*32
Step 3: In the “SET” panel on the left side of the screen, click “Save”. If the
connection is successful, the status bar is displayed as green.
Step 4: Click “Load” to load the matrix parameters, as seen in Figure 6.3.3.
Please note: It is necessary to configure the PC’s IP address when we use LAN port
control mode. See Figure
6.3.4.
The factory default IP
address for the matrix is
192.168.0.80, therefore you
must set the PC’s IP
address to a number in the
192.168.0.XXX range.