User Manual

BL-PRO-MIX- 8*8/18*18/32*32
Figure 6.5.2
The No.1 input channel can be switched to No.1, 2, 3, 4, 5, 8 output channels by
operating as demonstrated in Figure 6.5.1 and 6.5.2.
6.6 Save scene operation of matrix
Press “SAVE/VIEW” to enter the Save/View interface. See Figure 6.6.1. Press
“Previous” to check the current configuration of the matrix.
To save a specific scene, for example Scene1, choose “Scene1” and then press “Load”.
This will load and save the scene’s current I/O configuration.
If “Scene1” has been saved before, then we should be able to view the saved
configuration.
Note: Scenes saved in “Previous” are the current configuration, which changes
according to the matrix’s newly saved configuration.