Hardware manual

BrightSign Compact

This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Roku assumes no

obligation regarding future manufacturing unless otherwise agreed to in writing. www.rokulabs.com

The DB15 female has the following pinout:

pin Description pin Description

1 IR Blaster output 2 Ground

3 Button 6 I/O 4 Button 5 I/O

5 Button 3 I/O 6 Ground

7 Button 1 I/O 8 +3.3V output @ 500mA

9 Ground 10 Button 7 I/O

11 Ground 12 Button 4 I/O

13 Button 2 I/O 14 Ground

15 Button 0 I/O

DA15 female as viewed from the back of Brightsign Compact:

Roku makes a button/LED/IR board that can be used to demonstrate how the GPIO and IR works. Here is

the schematic to that board as an example of how to connect things to the GPIO connector: