Operation Manual
28
•
•
•
•
•
•
IMAGEMODE
•
0:
Centers the image and no scaling takes place. If the image is bigger than the screen,
BrightSign crops the image.
•
1:
Scales the image to fit so that it is fully viewable with its aspect ratio maintained.
•
2:
Scales and crops the image so that it totally fills the screen with its aspect ratio maintained.
•
3:
Scales the image so that it fills the screen and the whole image is viewable. This means that
the is stretched and the aspect ratio may not be maintained.
VIDEOPLAYERAUDIOMODE <audio mode> (HD2000 only)
Sets the audio mode used when playing a video
•
0:
Sets the audio to AC3 surround.
•
1:
Mixes AC3 surround audio down to stereo.
•
2:
Mutes the audio.
VIDEOPLAYERAUDIOOUTPUT <audio output> (HD2000 only)
Sets the audio output when playing a video
•
0
: Outputs analog audio.
•
2:
Outputs SPDIF audio in stereo PCM.
•
3:
Outputs SPDIF audio in raw AC3.
•
4:
Outputs analog audio with SPDIF mirroring raw AC3.
VIDEOPLAYERAUDIOSTEREOMAPPING <stereo mapping> (HD2000 only)
Sets the analog output when playing a video. Use this parameter when the
VIDEOPLAYERAUDIOOUTPUT
parameter is set to
0
– Analog audio.
•
0:
Maps stereo audio to Audio 3.
•
1:
Maps stereo audio to Audio 2.
•
2:
Maps stereo audio to Audio 1.