User guide

31
•
•
•
•
•
•
EVENTS
After the keywords, the first line of the interactive playlist is the EVENTS row. For every event type
you want to respond to, you must make an entry in this row. You do not need to enter events you
don’t use. BrightSign supports the following event types:
elo
Triggers with a USB Mouse or Elo Touch Screen press within a rectangular touch area. Use this
format to define the touch area:
elo:x:y:width:height
• x:y represents the starting position, where 0,0 is in the upper left
• width:height represents the width and height of the area in pixels based on a 1024 x 768
resolution
You can have as many elo events as you wish. Events can overlap touch areas, but in this case, you
should only use one at a time (see the demo example and how it uses a touch area that covers
the entire screen when not in the main menu).
NOTE: You can also use elor instead of elo. They are interchangeable.
eloc
Triggers with a USB Mouse or Elo Touch Screen press within a circular touch. Use this format to
define the touch area:
eloc:x:y:radius
• x:y represents the center of the circular region
• radius represents the radius of the circular region, in pixels