User guide

Chapter 1 – Getting Started

logs on it. However, if you need to play media files that are 4GB or larger in size, the card must be formatted using

NTFS.

Card Reader/Writer – Not required if using a USB flash drive. The card reader/writer must be connected to your PC and

must be compatible with your storage card.

Input Device – All models except HD110. One or more of the following types of input devices:

• Touch screen equipped with a touch controller that supports the standard HID specification. See this link for a list of

all supported touch controllers (HD810, HD1010, HD1010w, HD1020, XD1030, and XD1230).

• BrightSign’s BP200 and BP900 USB button panels (HD810, HD1010, HD1010w, HD1020, XD1030, and XD1230)

• Many brands of USB Keyboards (HD810, HD1010, HD1010w, HD1020, XD1030, and XD1230)

• Many brands of USB Mouse or Trackballs (HD810, HD1010, HD1010w, HD1020, XD1030, and XD1230)

• Many brands of USB Bar Code Scanners. (supported on HD810, HD1010, HD1010w, HD1020, XD1030, and

XD1230)

• Quadravox Serial Button Board

• AMX, Crestron, and similar control devices (serial & Ethernet)

• Any GPIO (open/close contact switch) button, signal, or LED (your custom board or LED display)

• PC (via serial port)

• IR remote control using the NEC Remote Control Protocols (HD810, HD1010, HD1010w, and HD1020 only). You

can purchase a compatible remote from BrightSign (see Appendix A for remote control codes).