User guide

118
Chapter 10 – Customizing Presentations
HD120, HD220, HD1020, XD230
• View mode: Use the dropdown list to specify a setting for videos.
o Scale to fit: Scales the video to fill the screen without maintaining the aspect ratio. The video may appear
stretched.
o Letterboxed and centered: Centers the video and adds black borders on the top and bottom. The aspect ratio
is maintained.
o Fill screen and centered: Centers the video and fills the screen. The aspect ratio is maintained.
• Audio Output: Enables or disables the Analog and HDMI audio outputs for the zone.
o Pass through: Supplies the un-decoded audio signal through the HDMI connector. Use this option if the zone
audio (for example, AC3 Dolby Digital) is being decoded on an external device.
o PCM audio: Supplies the decoded audio signal through the HDMI connector.
• Audio Mixing: Sends the stereo, left-only, or right-only audio signal.
• Image mode: Use the dropdown list to specify a setting for images.
Note: This option also appears when editing Images zones, but not when editing Video Only zones.
o Center image: Centers the image without scaling. This may result in cropping if the image is too large.
o Scale to fit: Scales the image to fit the zone. The image is displayed as large as possible with the correct
aspect ratio.
o Scale to fill and crop: Scales the image to completely fill the zone while maintaining the aspect ratio.
o Scale to fill: Scales the image to fill the zone without maintaining the aspect ratio.
• Initial volume (Audio): Set the initial volume for audio files (0-100).
• Initial volume (Video): Set the initial volume for video files (0-100).
XD1030, XD1230
• View mode: Use the dropdown list to specify a setting for videos.
o Scale to fit: Scales the video to fill the screen without maintaining the aspect ratio. The video may appear
stretched.
o Letterboxed and centered: Centers the video and adds black borders on the top and bottom. The aspect ratio
is maintained.