User guide

11
Chapter 2 – Setting up BrightSign Units
• Test Wireless: The player will indicate whether or not it was able to attain an IP address over
wireless.
• Test Internet Connection: The player will indicate whether or not it was able to attain a connection
to remote services.
8. Click Specify Firmware Update to indicate whether you want to update the firmware and to which version. The
Firmware Update window is divided by BrightSign model. In the section that corresponds to your BrightSign unit,
select a firmware version or select Do not update, and then click OK.
9. Under Unit Configuration, click Networked with BrightSign Network, and then specify the following:
a. (Optional) Enable diagnostic web server: Check this box to enable the Diagnostic Web Server. You can
include a username and password in the text fields below for added security.
b. (Optional) Enable local web server: Check this box to enable the Local Web Server. You can include a
username and password in the text fields below for added security.
c. (Optional) Enable Update Notifications: Check this box to have the player automatically refresh the User
Variables webpage whenever variable values change on the player.