User guide

12
Chapter 2 – Setting up BrightSign Units
d. Networked with BrightSign Network – Group: Use the dropdown list to select a BSN group for the unit.
Groups allow you to publish presentation schedules to multiple units simultaneously. See Managing groups
and Publishing with BrightSign Network for details.
10. Under Logging, check any of the following boxes to enable/disable logs and specify upload settings:
a. Enable playback logging: Creates a log that records start and end times, zone names, media types, and
file names.
b. Enable event logging: Creates a log that records timestamps, state names, zone names, event types, and
event data.
c. Enable state logging: Creates a log that records current and last state names, timestamps, and media
types.
d. Enable diagnostic logging: Creates a log that records timestamps, firmware and script versions, and the
current presentation.
e. Upload logs:
• On startup: Uploads log files each time the player is powered on.
• At specific time each day: Uploads log files daily at the specified time. Use the dropdown lists to
pick a time.
11. Use the RF Channel Scan Data (optional) field if you need to publish the same RF channel scan settings to
multiple XD1230 players. See Publishing Channel Scan Results for more details.
12. Use the Screen Color option to specify what screen color the player should display after it has successfully
completed the setup process. When the player displays this color, it is ready to receive content.
13. Create and install the setup files:
a. Click Create Setup Files.
b. Browse to and select an SD card (recommended) or USB flash drive (HD810, HD1010, HD1010w, HD1020,
XD1030, and XD1230 only) to store the setup files.
Note: Your storage device must be formatted using FAT32 if you are using it for network updates or saving logs
on it. However, if you need to play media files that are 4GB or larger in size, the card must be formatted using
NTFS.
c. Click OK.