User guide

22
Chapter 2 – Setting up BrightSign Units
d. Enable diagnostic logging: Creates a log that records timestamps, firmware and script versions, and the
current presentation.
e. Upload logs
• On startup: Uploads log files each time the player is powered on.
• At specific time each day: Uploads log files daily at the specified time. Use the dropdown lists to
pick a time.
• Relative URL for log handler: Type the location where you want logs to be uploaded. Click Create
Setup Files.
10. Use the RF Channel Scan Data (optional) field if you need to publish the same RF channel scan settings to
multiple XD1230 players. See Publishing Channel Scan Results for more details.
11. Use the Screen Color option to specify what screen color the player should display after it has successfully
completed the setup process. When the player displays this color, it is ready to receive content.
12. Create and install the setup files:
a. Browse to and select an SD card (recommended) or USB flash drive (HD810, HD1010, HD1010w, HD1020,
XD1030, and XD1230 only) to store the setup files.
Note: Your storage device must be formatted using FAT32 if you are using it for network updates or saving logs
on it. However, if you need to play media files that are 4GB or larger in size, the card must be formatted using
NTFS.
b. Click OK.
c. Turn off the BrightSign unit by unplugging the power adapter. Insert the card or flash drive into the unit.
d. Turn on the BrightSign unit by reconnecting the power adapter.
e. Important: Do not remove the SD card or flash drive from the player.