User's Manual

P1 P2

To install the battery

1. Align the battery’s exposed copper contacts with the battery

connectors at the bottom part of the battery compartment.

2. Insert the contacts side of the battery first and then gently push

the battery into place. Replace the back cover.

Charging the Battery

New batteries are shipped partially charged. Before you start

using your device, it is recommended that you install and charge

the battery. Some batteries perform best after several full

charge/discharge cycles.

Note: Only the AC adapter and USB sync cable provided with

your device must be used to charge the device.

Connect the USB connector of the AC adapter to the sync

connector on your device, and then plug in the AC adapter to an

electrical outlet to start charging the battery.