Avvio USER MANUAL mobile phone Avvio 516S ; Avvio 516 -1-
Content 1 2 3 General Information ................................................................................................................................................. 5 1.1 Profile.............................................................................................................................................................. 5 1.2 Safety Information .................................................................................................................................
4 5 Input method ........................................................................................................................................................... 18 4.1 Icons for Input Methods ................................................................................................................................ 18 4.2 To Shift Entry Methods ................................................................................................................................. 18 4.
5.12 TV ................................................................................................................................................................. 34 6 Appendix .................................................................................................................................................................. 35 7 FCC Regulations: ..........................................................................................................................................
1 1.1 General Information Profile Please read this pamphlet carefully in order to make your phone in perfect condition. Our company may change this mobile phone without prior written notice and reserves the final right to interpret the performance of this mobile phone. Due to different software and network operators, display on your phone may be different, refer to your phone for details. 1.
SWITCH OFF IN AIRCRAFT Wireless devices can cause interference in aircraft. Using a mobile phone in flight is illegal and risky. Please make sure that your mobile phone is powered off in flight. SWITCH OFF BEFORE ENTERING RISKY AREAS Strictly observe the relevant laws, codes, and regulations on the use of mobile phones in risky areas.
Use only in a normal and proper manner. EMERGENCY CALLS Ensure the phone is switched on and in service, enter the emergency number, e.g. 112, then press the Dial key. Give your location and state your situation briefly. Do not end the call until told to do so. Note: Just like all other mobile phones, this mobile phone does not necessarily support all the features described in this manual due to network or radio transmission problems. Some networks even do not support the emergency call service.
2 2.
2.2 Functions of Keys The mobile phone provides the following keys: Dial key Press it to originate a call by entering the called number or selecting a contact from the phonebook; or press it to receive an incoming call; or press it in standby state to show the latest call records. End key Press it to end a call being dialed or end an ongoing call; or press it to exit the menu and return to the standby state; or hold it for two or three seconds to power on or off the mobile phone.
In edit interface, you can press this key to switch to another line. Shift key In edit interface, you can press it to switch between input methods; Sym key Press it in the edit interface to input a symbol. Space key Press it in the edit interface to get a blank. Caps key In edit interface, you can press it to switch between upper case and lower case; Alt key In edit interface, press it to input an alternative symbol or number.
Please refer to their labels for other data related to the battery and the charger. 3 3.1 Getting started Installing the SIM Cards and the Battery An SIM card carries useful information, including your mobile phone number, PIN (Personal Identification Number), PIN2, PUK (PIN Unlocking Key), PUK2 (PIN2 Unlocking Key), IMSI (International Mobile Subscriber Identity), network information, contacts data, and short messages data.
With the metallic contacts of the battery facing the metallic contacts in the battery slot, press the battery down until it locks into place. Using code The mobile phone and the SIM cards support sorts of passwords, in order to prevent the phone and the SIM cards from being misused. When you are prompted to input any of the codes mentioned below, just input the correct code and then press the OK key. Phone lock code The phone lock code may be set to prevent your mobile phone from being misused.
you need to input the PUK. In general, the PUK can be obtained from the network operator. PUK The PUK code (Personal Unlocking Key) is required to change a blocked PIN. It is supplied with SIM card. If not, contact your network operator. If you input wrong PUK code for 10 times, SIM card will be invalid. Please contact the network operator to replace the SIM card. Barring code A barring code is required for setting the call barring function.
unpacked. For this type of machine, some of them have dual battery function. A new battery will have maximum performance after the first three full charge/discharge cycles. Battery level indication: Your mobile phone can monitor and display the battery state. Normally the remaining energy of the battery is indicated by the battery level icon at the upper right corner of the display screen. When the battery energy is insufficient, the mobile phone prompts "Battery low".
problems. Before the charging, ensure that the standard voltage and frequency of the local mains supply match the rated voltage and power of the travel charger. Using the Battery The performance of a battery is subject to multiple factors: radio network configuration, signal strength, ambient temperature, chosen functions or settings, phone fittings, and the voice, data or other application mode you choose to use.
danger! Note: To guarantee your personal safety and protect the environment, do not litter the battery! Return the old battery to the mobile phone manufacturer or place it in specified battery reclamation areas. Do not litter any battery with other rubbish. Warning: Short-circuits of the battery may cause explosion, fire, personal injury or other severe consequences! 3.4 Powering On/Off the Mobile Phone Hold the End key for a while to power on the mobile phone.
3.6 Dialing Calls In the standby interface, press number keys to input the area code and the telephone number, and then press the Dial key to dial a call. To end the call, press the End key. Dialing an international call Press the A/* key twice to input "+". Then input the country code, the area code and the telephone number. Finally, press the Dial key. Dialing a call to a number in the phonebook Enter the phonebook and use the up or down direction keys to find the telephone number you want to call.
3.7 Using the Headset It would enter headset mode automatically when you insert headset to the slot. Make sure of inserting it at the bottom of the slot, or you can’t use it normally. 4 Input method This mobile phone provides multiple input methods, including English input, smart English input and numeric input method. You can use these input methods when editing the phonebook, short messages, files and greeting text. 4.
4.3 Numeric and English Input You can input numbers with the numeric input method. Press a number key to input the corresponding number. You can input letters with the English input method. Press a letter key to input the corresponding letter. To input a blank, press Space. To clear wrong inputs, press the delete key. 4.
# key Q# English input: To input a blank, press Space. To clear wrong inputs, press the delete key. 4.5 Inserting a Symbol Press the sym key to enter the Select symbol interface and select a symbol you want. 5 5.1 Using the Menus Files The phone provides a certain space for users to manage files and supports the memory card. You can use the file manager to conveniently manage various directories and files on the phone and the memory card.
Format You can use this function to format all the data in the memory. The system will re-create a default folder. The formatted data cannot be recovered. Therefore, think twice before using the formatting function. 5.2 Contacts The mobile phone can store up to 500 telephone numbers. The number of telephone numbers that an SIM card can store depends on the storage capacity of the SIM card.
caller ringtone and caller picture. Phonebook settings: To set some parameters of phonebook. 5.3 Games Two games named F1 race and Snake are embedded in the phone. For specific operation, please refer to ‘help’ option of each game. 5.4 Call center Call log 5.4.1.1 Missed Calls You can view a list of the latest missed calls. Note: When the mobile phone indicates that some calls are missed, you can select View to enter the missed calls list.
5.4.1.5 Call timers Choose Call timers to view the last call time, the total time of all dialed calls and the total time of all received calls, and/or to reset all the time. 5.4.1.6 Text msg. counter Choose Text msg. counter to set the number of short messages sent and the number of short messages received. Note: This function does not relate to the SIM card. The number of short messages sent and the number of short messages received do not change even after the SIM card is replaced. 5.4.1.
you need to use a network barring code, which can be obtained from the network operator. If the code is wrong, an error message will be prompted on the screen. After selecting a call barring option, continue to select Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then contact the network. A moment later, the network will make a response and send the operation results to the mobile phone. Line switching: Switch to Line 1 or Line 2. By default, Line 1 is used.
Answer mode: Select an answer mode as per your need. 5.5 Messages If the short message memory is full, a blinking message icon appears on the top of the screen. To normally receive short messages, you need to delete some of the existing short messages. Write message Access this menu to create a text message or a multimedia message. Inbox Received messages are listed in this item. Drafts From the main menu select “Messages” to create text message.
Broadcast messages This network service enables you to receive a variety of text messages, such as broadcast messages about weather forecast or road conditions. At present, few networks provide this service. Please consult the network operator. Receive mode: Set it to On to enable or Off to disable cell broadcast service. Channel settings: Select receiving some types of cell broadcast messages or edit/delete some channel numbers.
Image viewer You can view the pictures or images through this function. Video recorder This function enables you to record dynamic pictures. In the capture interface, press left or right direction key to tune exposure value; up or down direction key to zoom in and zoom out, OK key to capture videos clip. Video player Use this function to play video files.
FM radio You can use the application as a traditional FM radio with automatic tuning and saved channels. In FM radio interface, you can press left or right direction key to search channels manually, down direction key to play/pause the playing process of the current channel, up direction key to enable auto search (once this is enabled, you can press left or right direction key to search channels automatically). You can press I/- or O/+ key to tune volume. 5.
Tasks This function enables you to create new memos, which you can view, add, edit, search, delete, delete overdue task, delete all, jump to date, and view uncompleted. If you have set the alarm for the memo, alarm will sound when time is up, the content of memo will display at the same time. Alarm Five alarm clocks are set but deactivated by default. You can activate one, multiple or all of them as needed. For each alarm clock, the ringing date and the ringing time can be set.
Stopwatch Stopwatch is simple application for measuring time with possibility to register several results and suspend/resume measurement. 5.8 Settings Dual SIM switch Manually selected by user and automatically decided by SIM cards are available for you to choose. You can select one of them as per your needs. Dual SIM settings Dual-SIM refers to two SIM card slots, and the two cards can standby at the same time or set one of them to display on the idle screen.
Pref. input method: Select an input method as preferred input method as per your need. Display: Users can access this item to set wallpaper, screen saver and LCD backlight etc. Auto update time: Turn on/off this function as per your need.
and change the locked PIN. To obtain the PUK, contact the network operator. Change PIN: To change PIN code of SIM card. Change PIN2: To change PIN2 code of SIM card. Phone security Phone lock: The function enables you to lock/unlock the phone. Once this function is enabled, correct password is required when the phone is locked. The password is 4 to 8 digits. Change password: to change phone password. Auto keypad lock: The function enables you to lock/unlock the keypad.
There is no option for activating the Headset mode on the screen. For details on operation, refer to General. Activate Select Activate to activate the selected mode. Customize After choosing one of the above five modes, select Customize to edit the following items: Alert type, Ring type, incoming call ringtone, ringtone volume, message ringtone, keypad tone, power on/off tone, etc. Reset Use this function to restore factory settings of user profile. 5.
5.11 Services Internet service This function enables you to view the internet. Your phone will ask you with existed way. You can start to view only by starting corresponding way. Homepage: indicates the default website of the internet； Bookmarks: used to save most commonly-used websites； Input address: input the website to be searched and press finish button to access to the network directly； Recent pages: browse the record of the recently browsed web pages； Settings: set up WAP-related service.
6 Appendix Appendix 1：Troubleshooting If you find exceptions when operating the mobile phone, restore the factory settings and then refer to the following table to solve the problem. If the problem persists, contact the distributor or service provider. Fault Cause Solution The SIM card Contact your network service provider is damaged. The SIM card is not in Check the SIM card SIM card error position. The metal face of the Clean the SIM card with a clean cloth SIM card is polluted.
Poor received signal quality Signals are obstructed. For instance, radio waves cannot be effectively transmitted nearby a high building or in a basement.
The mobile phone cannot be powered on The battery energy is exhausted.
The mobile phone is not in a service area of the GSM network The battery cannot be charged The signal is weak The charging voltage does not match the voltage range indicated on the charger An improper charger is used Poor contact Move to the network operator's service area Move to a place where the signal quality is high Ensure the charging voltage matches the voltage range indicated on the charger Use the charger specially designed for the mobile phone Ensure the charger plug is in good contact with
7 FCC Regulations: This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
4RF Exposure Information (SAR) This mobile phone meets the government’s requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: WVBA516.
