NAVEE Electric Scooter N40 User Manual Executive standard: CE EN17128 The pictures and functions described in this paper are for illustration and reference purposes only. The products described should be subject to the actual, real objects. The EN technical perform ance indicators m entioned are based on the specific experim ental environm ent, and the actual indicators m ay vary according to design and environm ent.
Cont ent s 1. Pr od u ct s & Accessor ies ----------------------------------------------------------------------2 2. I n t r od u ct ion t o Fu n ct ion s -------------------------------------------------------------------3 3. Saf et y I n st r u ct ion s ---------------------------------------------------------------------------4 4. Pr od u ct Disp lay ------------------------------------------------------------------------------8 5.
1 Products & Accessories Welcome Thank you for choosing the NAVEE electric scooter N40 (hereinafter referred to as N40). Now you can experience the pleasure of riding your own electric scooter. It should be pointed out that the N40 is only a sm all- sized electric scooter intended for individual riding, it is not suitable for acrobatic use. M anufacturer:Zhejiang Feishen Vehicle Industry Co.
2 Introduction to Functions 3 Safety Instructions Note: before using the product, please carefully read and follow the following important safety information. 3 1. Thi s pr oduct can onl y be used by one per son. Do not car r y ot her s at t he same t i me whi l e you ar e r i di ng. The pr oduct i s r ecommended f or use by r i der s over t he age of 13 and under t he age of 65.
6. Do not at t empt t o r i de over or pass st eps, cur bs or ot her obst acl es t hat have a hei ght of mor e t han 3 cm, si nce doi ng so may cause t he scoot er t o over t ur n and t her eby cause per sonal i nj ur y t o t he dr i ver or damage t o t he pr oduct , st eps, cur bs and/ or ot her obst acl es wi t h a hei ght under 3 cm shoul d al so be avoi ded as f ar as possi bl e. Do not par k t he scoot er on an i ncl i ne. 5.
4. Product Illustration Safety tips: do not hang or place any objects on its handlebars and body while riding. 14. Pl ease avoi d usi ng or pl aci ng t he pr oduct i n an envi r onment wher e t he t emper at ur e i s above 40 ℃ or bel ow- 10 ℃. Pl ease do not pl ace t hi s pr oduct t oget her wi t h f l ammabl e i t ems so as t o avoi d f i r e i n t he unl i kel yacci dent al ci r cumst ances. 13. Do not use t hi s pr oduct beyond t he maxi mum l oad( 100 kg) speci f i ed i n t hi s pr oduct .
5. Correct Riding Method 6 Handlebar Control 1. Check the scooter before each ride, and ride only after the folding safety lock is engaged. 2. Wear well-fitting flat heeled sports shoes to ride this product. 3. Please practise riding in an open space. 4. Keep away from vehicles and crowded areas. Please drive on the roads or areas stipulated by local laws.5. Safety helmet and protective equipment must be worn while riding. 6. The age of the rider should be between 13 and 65 years old (inclusive). 7.
7 Assembly 8 Deployment Steps a. Open the kickstand. a b. Pull the buckle upwards to release it from the hook. b c. Hold the stem back up, lift the folding safety lock, and push the quick-release lever inward to the end. d c a. Open the kickstand. b. Hold the stem up until it is completely in an upright position. Lift the folding safety lock, and push the quick-release lever inward to the end. c. Install the handlebar onto the stem, and make sure to install the handlebar in the correct direction. d.
Folding Steps 10 Charging The scooter needs to be turned off before being folded. Since the product can be folded, do not step on or turn the folding safety lock when riding. Note: Please always use the original charger. 2. Hold the stem, lift the folding safety lock, and open the quick-release lever, then fold the stem. 1. Open the kickstand. 1. Open the rubber plug of the charging port. 2. Plug the charger into the charging port. 3.
12 Basic Operation A: Accelerator D: LED Display 13 Operating Instructions B: Power & Gear Shift Button E: Bell F: Brake Level Power Button Power On/ Off: Press and hold the power button for 3 seconds to turn on the scooter. After power on, press the power button for 3 seconds to turn it off. Gear setting After power on, press the power button twice to shift the gears. Speed Control Press the accelerator to control the speed range(1-15.5mph(25 km/ h)).
14 Riding Instructions 15 Battery and Charger Parking Each NAVEE scooter N40 is equipped with a bespoke lithium battery and a dedicated sm art charger. Each scooter and its accessories have a specific num ber, do not use other brands of charger, other types of chargers are not suitable for this product. 1. Under normal circumstances, if you hold the left brake handle, the scooter will power off and brake immediately. The greater the grip angle, the greater the braking force. 2.
16 LED Display Power Indicator Definition of LED The battery power is indicated by 5 bars, each representing approxim ately 20% of a full battery. The M 5 LED flashes when the battery level falls below 10%. ＞80% ＞60% ＞40% ＞20% M1-M5 On M2-M5 On M3-M5 On M4-M5 On <10% M5flashing Headlight State Indicator: On Off If the headlight setting is on, the indicator will always be on. If the headlight setting is off, the indicator will always be off.
17 Maintenance Lubrication Warning T2 flashes and the display values E1-E6 flash Fault Rx communication failure Code E1 Solution Please check whether the braking tail light is on. If it is not an this means that there is no power to the cortroller. Replace the contrdler or instrument. If it is on, please check whether the connecting line from the instrument to the controller is open. If it is pressed,release the brake.
18 FAQ 19 SPECIFICATIONS When the product fails, please refer to the following ways to try for solution: 2.The value is inconsistent with the actual value. Reason: incorrect or m issing param eter setting. 1.The display screen is black. press to restart the scooter. 车。 Reason: this scooter is exposed to sunlam p for a long tim e. Solution: put the scooter in a cool place for a period of tim e. 4. If the product cannot operate normally, please check whether the following have been completed. 3.
20 Warranty and service Warranty Statement: If the product is within the warranty period from the date of your purchase, we will repair, replace or return it free of charge as the case m ay be if it is confirm ed by the m anufacturer or dealer that it is faulty or dam aged due to quality defects under norm al use.
21 Warranty card When purchasing the product, we recommend that you clearly fill in the following information and affix the sales seal to protect your legitimate rights and interests: Full name User’ s information E-mail Mailing address Contact number Postal Code Name of the product Sales date Product information Product model Invoice number Name Contact number Address Postal Code Vendor information Note: (1) This form shall be confirmed by the seller's seal (2) For products applicable to relev
