User's Manual

12 Basic Operation 13 Operating Instructions
。
15 16
A: Accelerator B: Power & Gear Shift Button
D: LED Display E: Bell F: Brake Level
Power Button
Power On/ Off: Press and hold the power but ton for 3 seconds to turn on the scoot er.
After power on, press the power butt on for 3 second s to t urn it off.
Gear setting
After power on, press the power butt on twice to shift the gears.
Speed Control
Press the accelerator to control t he speed range(1- 15.5mph(25 km / h)).
Brake Control
Hold the brake co ntrol on the left t o brake.The greater t he holding force is, the great er t he b raking force is. When
braking quickly, it is easy to fall due t o the loss of traction, and you are at risk of serious injury. Please driveat moderate
speed and pay attention t o pot ent ial dangers.
Head and Tail Light
After power on, click the power but t on t o turn the head and t ail light on and off.
Emergency Braking
In case of em ergency, hold t he left brake t ig htly to control the brake, which can activate the rear wheel friction brake and
the front wheel electromagnetic brake at t he same t ime. In order t o avoid rid ing risk and dam age to t he rear wheel, the
rear emergency brake should not be used during norm al driving wit hin the speed control range.
Tire Pressure
Before riding, please m ake sure t hat the tire pressure is not lower t han 230KPA and the m axim um pressure is not higher
than 250 KPA. If t he tire pressure is too high, there is a risk that t he tire will burst. If t he tire pressure is too low, the
mileag e will be reduced and the t ire will be damaged . If the scoot er is not used for a long tim e, the t ire pressure m ay
also be lower t han the stand ard . (N ot e:solid tire is not in t he scope of requirem ent s).