Owner's manual

3) Press the STANDBY button to turn on the unit or turn to the standby
mode.
FAST FORWARD / FAST REWIND: In USB mode, press and hold the 22 or 28
button on remote control to fast rewind or fast forward the current track.
PREVIOUS / NEXT: Press the 19 or 25 button to skip to the previous or next
song.
MUTE: Press the MUTE button on remote control to mute the sound. Press
again or press the VOLUME+/- buttons to resume the volume level.
SETTING: Press the VOLUME+/- buttons to turn the volume up or down.
PLAY/PAUSE: Press the PLAY/PAUSE button to pause or play the song.
MODE SELECTION: Press the SOURCE button to enter the wanted mode.
DISPLAY: Press the DISPLAY button on the remote control to turn on or off
the display screen.
Note: This appliance is designed to be automatically put on hold after 15
minutes of inactivity. Press the STANDBY button to reactivate the unit.
BLUETOOTH CONNECTION
1. Place the Bluetooth device (Smartphone) within 10 meters.
2. Activate the Bluetooth function of your phone.
3. Press the SOURCE button to select the Bluetooth mode. The indicator
flashes at high speed.
4. Access the phone's Bluetooth search interface.
5. Select the device name from the search list.
6. When the docking is complete, a beep will sound and the indicator will
light blue.
7. On some devices, select OK / YES / PAIR or enter "0000" to pair with the
phone.
8. To disconnect the device and connect it to another device: deactivate the
Bluetooth function of your device and the docking with the Bluetooth
device. Follow the steps to attach it to another peripheral.
Note: This device can be connected to only one peripheral at a time and
can only memorize the last connected peripheral during the reactivation of
the Bluetooth mode.
9. If the peripheral is more than 10 m, place it within reach of the search
signal and reconnect it manually.
NFC FUNCTION
1. Near Field Communication (NFC) technology allows you to establish a
fast Bluetooth connection between your device and other Bluetooth
devices equipped with the NFC function.
2. Activate the function. Consult the technical specifications of your device.
3. Turn on the device and select the Bluetooth mode. Place your NFC device
(NFC Smartphone) on the NFC sensor for 3 seconds.
4. A beep will sound during the coupling of the two devices.
5. To disconnect the device from the NFC function, return the phone to the
NFC sensor for 3 seconds. Refer to the Basic Operation chapter to control
playback in Bluetooth mode.