Owner's manual

Note:
1. This device can be connected to a single peripheral at a time and can
only memorize the last connected device during the reactivation of the
Bluetooth mode.
2. The NFC function is not compatible with all Bluetooth peripherals.
Consult the technical specifications of your device.
3. To enable this function, some NFC peripherals require the installation of
"NFC APK".
4. Always place the NFC peripheral in the correct position of the NFC
sensor.
5. If the peripheral is more than 10 meters (maximum Bluetooth range),
place it within reach of the Bluetooth search signal.
AUDIO
1. Disconnect the power cord before removing the connections.
2. This unit can be connected to a disc player, MP3 player, smart phone,
computer or other music player by means of an audio cable. Select one of
the following connections:
1. Connect the audio cable to the line out of the MP3 player / headset and
the AUDIO L / R jacks.
2. Connect the audio cable to the AUDIO IN jack and to the L / R audio
output of the disc player.
1. Press the SOURCE button to switch to audio mode.
2. Control playback with the MP3 / CD player only.
3. If the AUDIO IN and L / R AUDIO IN jacks are connected at the same time,
playback is prioritized from the device connected to the AUDIO IN jack.