Full Product Manual

LOCATION OF CONTROLS:

1. ON/OFF Tap Lens

2. Battery Compartment

Model # BRRC113

INSTALLATION:

Adhesive Tape:

1. Make sure the area where you want to attach

the light is clean and clear of debris and dust.

2. Attach adhesive tape to mounting bracket (Fig. 2).

3. Place mounting bracket in desired location.

Press firmly to ensure adhesive sticks.

CAUTION: Adhesive tape may remove paint or damage

surface when removed.

Screws:

1. Remove mounting bracket from light.

2. Use the mounting bracket as a guide to drill two (2) pilot

holes. Secure mounting bracket to surface with screws

(included). Do not over tighten screws.

3. Attach light to mounting bracket.

OPERATING INSTRUCTIONS:

ON/OFF Tap Lens:

1. Press lens to turn light ON/OFF.

FIG. 1

Attach adhesive

tape here

FIG. 2

WIRELESS ULTRA THIN LED PUCK LIGHT

OWNER’S MANUAL

PAGE 1
WIRELESS ULTRA THIN LED PUCK LIGHT OWNER’S MANUAL Model # BRRC113 FIG. 1 1 LOCATION OF CONTROLS: 1. ON/OFF Tap Lens 2. Battery Compartment INSTALLATION: Adhesive Tape: 1. Make sure the area where you want to attach the light is clean and clear of debris and dust. 2. Attach adhesive tape to mounting bracket (Fig. 2). 3. Place mounting bracket in desired location. Press firmly to ensure adhesive sticks. 2 FIG. 2 CAUTION: Adhesive tape may remove paint or damage surface when removed. Screws: 1.
PAGE 2
BATTERIES: INSERTING / REPLACING THE BATTERIES If the LEDs appear to be dim the batteries need to be replaced. FIG. 3 TO REPLACE THE BATTERIES 1. Remove battery compartment cover. 2. Remove old batteries (if replacing batteries). 3. Insert three (3) new AAA batteries (not included) 4. Make sure to follow the battery polarity guide when installing new batteries (Fig. 3). 5. Replace battery compartment cover.