Installation Manual

10
1. POWER Button.PresstoturntheEspressoMakerON.ThePOWERbuttonwillbegintoash.
When the system is up to temperature, all 4 buttons on the control panel will illuminate.
2. STEAM Button. After espresso shots have been pulled, press to activate the heater to
texturizemilk.Whenpressed,theSTEAMbuttonwillash.Astemperatureisachievedand
steam is built, the button will illuminate.
3. 15 Bar Pressure Gauge. Displays pre-infusion to espresso pressure range.
4. Single Shot Programmable Button. Press once to initiate a 1 oz. extraction.
Pressandholdthebuttonfor3secondstoadjustandtodialinfuturesingleshotvolume.
5. Double Shot Programmable Button. Press once to initiate a 2.5 oz. extraction.
Pressandholdthebuttonfor3secondstoadjustanddialinfuturedoubleshotvolume.
6. Function Control Dial. Once pressure is built and the STEAM button is illuminated
(stopsashing),turnthedialtoactivatetheSTEAMwand.
7. Hot Water Function. Place the frothing pitcher under the steam wand. Turn the function
controldialtoWATER.Allowwatertollthecontainer.Turnthefunctioncontroldialtoback
to OFF position.
Steam
Single
Double
Power
Pressure
E
s
p
r
e
s
s
o
R
a
n
g
e
1 2
3
4 5
6
7
SO-316159_50030_Brim 15 Bar Espresso Maker_IM R1.indd 10 2019-04-11 11:51 AM