Use and Care Manual

6
HOSE & REGULATOR SPECIFICATION AND INSTALLATION:
• DO NOT use any other pressure regulator/hose assembly other than the one supplied
with your grill.
• DO NOT attempt to adjust or repair a regulator.
• Ensure the regulator valve is CLOSED prior to connecting the gas cylinder to your grill. Read
and follow all instructions and warnings on the supply hose safety tags. Read and follow all
warnings in this manual concerning the safe use of gas cylinders and the hose and regulator
before connecting cylinder to grill. Read and follow all warnings on the cylinder.
WARNING
FITTING THE HOSE
Before connecting the “Snap on compact” to a cylinder valve:
1. Connect regulation rubber hose to the barbed stem on the regulator.
Tip: Lubricate the barbed stem with water to help connect the regulator
hose to the regulator.
2. Use a hose clamp to secure the regulation rubber hose to the regulator.
Rubber Hose
Hose Clamp
The regulator supplied is a 27mm “Snap on compact” propane regulator operating at 37 mbar pressure.
The “Snap on compact” is a regulator designed to supply gas to consuming appliance at a pressure and
capacity as indicated on the regulator identification label.
The “Snap on compact” can be fitted to any cylinders equipped with automatic valves having a diameter as
indicated on the regulator.
1
2
3
4
5
6
GAS REGULATOR
READ THOROUGHLY BEFORE USE
Gas Regulator Parts:
1
Regulator Identification Label
2
Regulator Assembly
3
Regulation Rubber Hose
4
Hose Clamp
5
Regulator Valve
6
Regulator Clamp