Installation Guide

30
Step 19
Insert the pre-attached screws in
the fryer burner valve assembly
through the holes in the fryer
burner front panel, then  rmly
seat the valve nozzle into the
burner venturi. Slide the fryer
burner valve assembly down in
the keyholes on the fryer burner
control knob bezel as shown
to lock in place. Tighten with
screwdriver. Install fryer burner
control knob onto valve stem
Step 20
Attach fryer burner igniter lead
to electrode on bottom of fryer
burner.
Fryer Burner
Igniter Lead
Electrode